Installation

! Keep this instruction manual in a safe place for

GB

future reference. Should the appliance be sold,

 

 

transferred or moved, make sure the instruction

 

manual accompanies the Washer-dryer to inform

 

the new owner as to its operation and features.

 

! Read these instructions carefully: they contain

 

vital information on installation, use and safety.

 

Unpacking and levelling

 

Unpacking

 

1. Unpack the Washer-dryer.

 

2. Check whether the Washer-dryer has been

 

damaged during transport. If this is the case, do

 

not install it and contact your retailer.

3. Remove the 4 protective screws and the rubber bush with the respective spacer, situated on the rear of the appliance (see also

the installation leaflet).

NB:The plastic spacers

may fall down inside the machine once the bolt

has been removed, and will not interfere with the operation of the machine.

4.Do not remove external bar.

5.Seal the gaps using the plastic plugs provided.

6.Keep all the parts: you will need them again if the Washer-dryer needs to be moved to another location.

!Packaging materials are not children's toys.

Levelling

Your machine may make a considerable amount of noise if the two front feet have not been adjusted correctly.

1.Install the Washer-dryer on a flat sturdy floor, without resting it up against walls, furniture cabinets or other.

2. If the floor is not perfectly level, com- pensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle of inclination, measured according to the worktop, must not exceed 2°.

Levelling your appliance correctly will provide it with stability and avoid any vibrations, noise and shifting during operation. If it is placed on a fitted or loose carpet, adjust the feet in such a way as to allow enough room for ventilation beneath the Washer- dryer.

Electric and water connections

Connecting the water inlet hose

1. Insert seal A into the end of the inlet hose and screw the latter onto a cold water tap with a 3/4 gas threaded mouth

 

 

A

(see figure).

 

 

 

 

 

 

Before making the

 

 

 

connection, allow the

 

 

 

water to run freely until

 

 

 

it is perfectly clear.

 

 

 

2. Connect the other end

 

 

 

 

 

 

of the water inlet hose to

 

 

 

the Washer-dryer,

 

 

 

screwing it onto the

 

 

 

appliance's cold water

 

 

 

inlet, situated on the top

 

 

 

right-hand side on the

 

 

 

rear of the appliance (see

 

 

 

figure).

 

 

 

 

3.Make sure there are no kinks or bends in the hose.

!The water pressure at the tap must be within the values indicated in the Technical details table (on the next page).

!If the water inlet hose is not long enough, contact a specialist store or an authorised serviceman.

!Ensure that the supply taps are allowing water through. Old taps may seize in the closed position and thus prevent water reaching the machine.

Page 1 Page 3
Page 2
Image 2
Hotpoint BHWD149 manual Installation, Unpacking and levelling, Electric and water connections
Page 1 Page 3

BHWD149 specifications

The Hotpoint BHWD149 is a highly efficient washer dryer, designed to meet the needs of modern families seeking performance and versatility in their laundry routine. This appliance combines the functionality of a washing machine and a dryer in one compact unit, making it an excellent choice for those with limited space.

One of the standout features of the BHWD149 is its impressive washing capacity. With a load capacity of 9 kg for washing and 6 kg for drying, this model accommodates larger loads, allowing users to tackle more laundry in a single session. This is particularly beneficial for busy households where time-saving is a priority.

In terms of washing performance, the BHWD149 boasts a range of washing programs tailored to different fabric types and laundry requirements. From delicate items to heavily soiled work clothes, users can easily select the appropriate cycle, ensuring their clothes receive the optimal care. Additionally, the appliance includes a rapid wash option, which can clean lightly soiled clothes in just 30 minutes, perfect for those last-minute laundry needs.

Energy efficiency is another critical characteristic of the Hotpoint BHWD149. It is designed to minimize electricity usage while delivering exceptional cleaning results. The machine has an energy rating of A, making it a responsible choice for environmentally conscious consumers. This efficiency not only reduces the household's carbon footprint but also translates to lower utility bills over time.

The BHWD149 features advanced technologies such as the 'Anti-Allergy' cycle, which is ideal for households with allergy sufferers. This option uses higher temperatures and additional rinses to remove allergens and dirt effectively, ensuring that laundry is not only clean but safe for sensitive skin.

Another notable technology is the 'Direct Injection' feature, which pre-mixes the detergent with water before it enters the drum. This results in a more effective wash, as the detergent penetrates fabrics better and cleans more efficiently, even at lower temperatures.

To enhance user convenience, the Hotpoint BHWD149 comes equipped with a digital display, allowing users to monitor and adjust settings with ease. The machine is also designed with a delay start option, enabling users to set the washing cycle to begin at their convenience, making it easier to manage busy schedules.

In summary, the Hotpoint BHWD149 is a robust washer dryer that offers a combination of efficiency, advanced features, and user-friendly functionality. With its substantial load capacity, energy-saving technologies, and tailored wash options, it stands out as a reliable appliance for any household looking to streamline their laundry tasks. Whether managing a busy family schedule or simply seeking an efficient laundry solution, the BHWD149 is an outstanding choice.
Top Page Image Contents