Connecting the drain hose

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

• the supply voltage is included within the values

GB

indicated on the Technical details table

 

(see page 5);

 

 

• the socket is compatible with the washing

 

machine’s plug. If this is not the case, replace

 

the socket or the plug.

 

Your appliance is now supplied with a 13 amp fused plug

 

it can be plugged into a 13 amp socket for immediate

 

use. Before using the appliance please read the instruc-

 

tions below.

 

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connec- ting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

WARNING - THIS APPLIANCE MUST BE EARTHED.

THE FOLLOWING OPERATIONS SHOULD BE CARRIED

OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved

fuse to BS 1362 should always be used, and the fuse

cover re-fitted. If the fuse cover is lost, the plug must

not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking or

the colour that is embossed in words on the base of the

plug. Replacements can be obtained directly from your

nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and

you should wish to re-route the mains cable through

partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re-wearable

plug bearing the BSI mark of approval.

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpi- pe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with

the applicable law;

•the socket is able to sustain the appliance’s maximum power load indicated in the Technical details table (see page 5);

or:

the mains cable is wired directly into a 13 amp cable

outlet, controlled by a switch, (in compliance with BS

5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you

make the pins unusable so that it cannot be accidentally

inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow

Earth

Blue

Neutral

Brown

Live

3

Page 2 Page 4
Page 3
Image 3
Hotpoint BHWD 129 manual 65 100 cm, Earth, Blue, Brown Live
Page 2 Page 4

BHWD 129 specifications

The Hotpoint BHWD 129 is a versatile and efficient washer-dryer combo designed to meet the needs of modern households. With its sleek design and array of advanced features, this appliance stands out as a practical solution for individuals and families looking to save space without compromising on performance.

One of the key features of the Hotpoint BHWD 129 is its generous load capacity. This model can handle up to 6 kg of laundry in the washing cycle and 5 kg in the drying cycle, making it suitable for small to medium-sized households. The combination of washing and drying in one unit allows users to streamline their laundry routine, saving time and effort.

In terms of technology, the Hotpoint BHWD 129 is equipped with an Eco cycle, which optimizes water and energy usage, making it an environmentally friendly choice. The machine also features a range of wash programs tailored to different fabric types and laundry needs. From quick washes for those in a hurry to more intensive cycles for heavily soiled items, the machine offers flexibility to cater to various laundry requirements.

Another notable characteristic of the Hotpoint BHWD 129 is its Spin Cycle performance. With a maximum spin speed of 1200 RPM, it effectively removes excess water from clothing, reducing drying times significantly. This feature is particularly advantageous for those using the drying function, as it allows laundry to dry more quickly and efficiently.

The appliance also includes a range of temperature settings, enabling users to customize the washing process according to the specific needs of their fabrics. The intuitive control panel ensures that selecting the right program is straightforward, making it user-friendly for individuals of all skill levels.

In addition, the Hotpoint BHWD 129 incorporates advanced noise reduction technology, allowing for quieter operation. This makes it a suitable choice for apartments or homes where noise levels should be kept to a minimum. The design also ensures that maintenance is easy, allowing users to keep the machine in top condition with minimal effort.

Overall, the Hotpoint BHWD 129 is an excellent choice for those seeking a compact, efficient, and multifunctional washer-dryer combo. Its combination of advanced features, user-friendly design, and eco-conscious technology makes it a valuable addition to any laundry room. Whether you have a busy family or are living single, this machine offers the reliability and performance necessary to make laundry day a breeze.
Top Page Image Contents