Hotpoint BHWM 149 Description of the washing, Machine and starting a wash cycle, Control panel

Models: BHWM 149

1 20
Download 20 pages 29.38 Kb
Page 10
Image 10

 

Description of the washing

 

machine and starting a wash cycle

 

 

 

 

 

 

 

 

GB

Control panel

WASH CYCLE PROGRESS

 

indicator lights

ON/OFF button

TEMPERATURE

knob

SPIN SPEED

knob

DOOR LOCKED

indicator light

WASH CYCLE

knob

Detergent dispenser drawer

FUNCTION

buttons with indicator lights

START/PAUSE

button with indicator light

Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”).

ON/OFF button: switches the washing machine on and off.

WASH CYCLE knob: programmes the wash cycles. Du- ring the wash cycle, the knob does not move.

FUNCTION buttons with indicator light: used to select the available functions. The indicator light corresponding to the selected function will remain lit.

SPIN SPEED knob: sets the spin speed or exclude the spin cycle completely (see “Personalisation”).

TEMPERATURE knob: sets the temperature or the cold wash cycle (see “Personalisation”).

WASH CYCLE PROGRESS indicator lights: used to monitor the progress of the wash cycle.

The illuminated indicator light shows which phase is in progress.

DOOR LOCKED indicator light: indicates whether the door may be opened or not (see next page).

START/PAUSE button with indicator light: starts or tempo- rarily interrupts the wash cycles.

N.B. To pause the wash cycle in progress, press this button; the corresponding indicator light will flash orange, while the indicator light for the current wash cycle phase will remain lit in a fixed manner. If the DOOR LOCKED indicator light is switched off, the door may be opened.

To start the wash cycle from the point at which it was inter- rupted, press this button again.

Standby mode

This washing machine, in compliance with new energy sa- ving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again.

10

Page 10
Image 10
Hotpoint BHWM 149 manual Description of the washing, Machine and starting a wash cycle, Control panel