Display
In addition to being a practical tool to programme your appliance (see page 9), the display provides useful information concerning the wash cycle and status.
Once you have pressed the START/CANCEL button to start the programme, the display will indicate the amount of time left until the end of the wash cycle. If a delayed start has been set (using the Delay Start, see page 9), the delay time will be indicated on the display.
The following information is displayed during the wash cycle:
Cycle phase under way:
Wash cycle
Rinse
Spin cycle
Customised functions and options:
To select functions and options, see below and on page 9.
Buzzer:
Your washing machine comes with a buzzer, which will inform you of the various functions being carried out, or of any malfunctions: incompatibility, option/ programme keys, start, end of cycle, reset.
Keyboard lock:
For your safety and that of your children, you can block all the keys during the machine's operation or during waiting position (delayed start -
To disable this function, hold the same button down for 4 seconds.
Door lock:
If the symbol is on, the washing machine door is locked to prevent it from being opened accidentally. To avoid any damages, wait for the symbol to switch itself off before you open the appliance door.
This model is equipped with a device that enables the door to be opened during the course of the wash cycle (however, this is only an option in phases where the safety conditions are guaranteed). To carry out this task, switch off the machine (by pressing the ON/OFF button), open the door, load the necessary clothes or detergent, close it again, switch the machine back on by pressing the ON/OFF button and press the START/ CANCEL button. The machine will restart the wash cycle from the point at which it was interrupted.
At the end of the programme, the word END is displayed.
In the event of an anomaly, an error code will appear, such as:
GB
Installation Description Programmes Detergents Precautions
Care Troubleshooting Service
7
