HOTPLATE
The has one very high speed Wok burner, one high speed burner and two simmering burners which will accommodate pans between 100mm (4”) and 240mm (9 ½”) diameter. All pans should be positioned centrally over the burners.
TO USE THE HOTPLATE
1.Push in and turn the control knob of the chosen burner
2.Turn the control knob
3.To turn off, turn the control knob fully clockwise to the symbol O .
DO | NOT | use the hotplate unless all pan supports are in position. |
DO | NOT | use |
DO | NOT | use round base woks directly on the pan supports. |
Each burner is fitted with a spark ignitor for lighting the gas. To ensure rapid lighting of the burners every time they are used, the ignitors must be kept clean and dry. Remove any food spillage or cleaning materials from the ignitor using a small nylon brush such as a tooth brush. Access to the ignitor can be achieved by lifting off the loose burner parts carefully when the burners are cool.
When the hotplate burner bodies and caps are removed for cleaning, be careful not to drop any food particles or cleaning materials into the burner bases, to avoid the possibility of blocking the gas jets.
If aluminium based pans are used, a silvery deposit may appear on the top edge of the pan support fingers. See 'Care and Cleaning' section for cleaning information.
Models with Hob Gas Burner Safety Devices to Prevent Leaks *
These models can be identified by the presence of the device itself.
!Since the hob burners are equipped with a safety device, you must hold the control knob in for about
HOB GAS BURNER
SAFETY DEVICE
ELECTRONIC
LIGHTING DEVICE
* (only available on certain models)
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
19
