Hotpoint DC 28 Detergent and rinse aid, Fc D, Dishwasher, Useful tips, Loading the detergent

DISHWASHER

Detergent and rinse aid

Only use specific dishwasher detergents. Pour the detergent into the dispenser on the inside of the door. Before the wash cycle starts!

The detergent	B
Loading the detergent
ToopenlidA,pressbuttonB.The
detergentshouldbepouredintothe		D	C
twocontainersCandDuptothe
rim.
Nowyoucanclosethelid:pressit
downuntilyouhearitclick.	15 gr.
If youprefer to use thedetergent			5 gr.
in tablets, place one of these in
container"D".Nowyoucanclose
thelid:pressitdownuntilyouhear
itclick.

It won't close!

Check whether there is anyA detergentresidueontheedgesof

thedispenser.Itisduetothisresi- duethatthelidwon'tclose.Getrid ofitandyou'llseethatitcloses.

Useful tips

•Use the right amount of detergent: if you use too much, you will not get cleaner dishes, but just m o r e

e n v i r o n m e n t a l p o l l u t i o n .

•Keep your

d i s h w a s h e r detergent and rinse aid in a cool, dry place and away from c h i l d r e n .

The rinse aid.

Thisproductmakesdishessparkle more as it improves their drying. Therinseaidcontainerissituated ontheinsideoftheappliancedoor; you should refill it when you see the container is empty by means ofindicator “D”.

(Ifyourdishwasherisfittedwitha “low rinse aid” indicator light, fill thecontainerupwhentheindicator lightflashesorlightsup).

Loading the rinse aid.

Toopenthedispenser,turncapC anticlockwise.Takecarewhenyou pour in the rinse aid to avoid it overflowing. You can adapt the amount of rinse aid used by the dishwasher:regulatetheadjuster FwhichyouwillfindunderlidC.

FC

D

You can choose from six different positions. It is normally set to 2.

Proper dosage of

the rinse aid

improves drying. If drops of water remain on the dishes or spotting occurs, turn the dosage adjuster to a higher setting. If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to a lower setting.

Warning

Three-in-one dishwasher tablets are now available on the market, and combine the detergent, salt and rinse aid all in one. If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the appliance interior.

In any case, please read the manufacturer's instructions provided on the packet.

If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of cycles.

HOTPOINT DISHWASHER - Instructions for installation and use 5