Before Using your Appliance...

Before using your Dishwasher you must carry out the following steps to ensure you obtain the best possible wash performance from your appliance.

Follow these 4 steps:

-Adjust the Water Softener.

-Fill the Salt Container.

-Fill the Rinse Aid Container.

-Add detergent.

ADJUSTING THE WATER SOFTENER...

The dishwasher is equipped with a device for the user to adjust the water softening system, according to the hardness of the water supply. The adjustment selector can be found inside the plastic locking ring located on right hand interior wall. This allows adjustment to 5 settings:

adjustment selector

In order to rinse dishes and glasses satisfactorily, the dishwasher requires soft water i.e containing little or no lime, otherwise water stains are left behind on crockery and glasses etc. If the tap water exceeds a certain level of hardness, it must be softened, ie. decalcified, so that it can be used in the dishwasher.

The dishwasher is equipped with an automatic softening system which uses a special regenerating salt to reduce the hardness of the water. The dishwasher is factory set for water hardness level 3 (average hardness 41-60˚dF - 24-31˚dH).

In order to ensure that the correct amount of salt is being used to regenerate the water softener, the dishwasher is equipped with an electronic device for adjusting the water softening setting. The setting may be adjusted electronically. To set this correctly the hardness of your water needs to be ascertained.

SETTING

WATER HARDNESS

 

 

 

N. 1 NO SALT

0

- 4˚dH (0 - 7˚dF)

N. 1

5

- 9˚dH (8 - 15˚dF)

N. 2

10 - 22˚dH (16 - 37˚dF)

N. 3

23 - 29˚dH (38 - 50˚dF)

N. 4

30 - 35˚dH (51 - 60˚dF)

N. 5

36 - 41˚dH (61 - 70˚dF)

 

 

 

WATER HARDNESS TABLE:

Contact your local water board for information on the water hardness for your area.

When using water of medium hardness, the regenerating salt container should be refilled after approximately 20 wash cycles. The salt container can hold approximately 1.7Kg of salt in grains.

12

Page 12
Image 12
Hotpoint DF56, DF55 installation instructions Before Using your Appliance, Adjusting the Water Softener

DF55, DF56 specifications

The Hotpoint DF56 and DF55 are two outstanding integrated dishwasher models that stand out in the competitive kitchen appliance market. Designed to optimize functionality while maintaining energy efficiency, these dishwashers come loaded with innovative technologies and features that promise to deliver an exceptional washing experience.

One of the most prominent features of the Hotpoint DF56 and DF55 is their impressive capacity. Both models can accommodate up to 13 place settings, allowing users to clean large loads without the need for multiple cycles. This is particularly beneficial for families or those who frequently entertain guests, as it saves time and energy.

Energy efficiency is a key characteristic of these dishwashers. They are designed to consume minimal water and electricity, thanks to the A+ energy rating. This eco-friendly design not only reduces the utility bills but also ensures that users are making a sustainable choice for the environment.

The Hotpoint DF56 and DF55 are equipped with multiple wash programs that cater to various cleaning needs. Users can select from options such as intensive wash for heavily soiled pots and pans, quick wash for rapidly refreshing lightly soiled dishes, and eco wash for those who want to be more environmentally conscious. These programs allow for tailored cleaning based on the specific requirements of the load.

In addition to wash programs, both models feature advanced technologies that enhance performance. The innovative "3D Zone Wash" technology in the DF56 model distributes water more effectively through three spray arms, ensuring a thorough clean even in hard-to-reach areas. This feature is especially useful for cleaning larger items, such as baking trays and tall pots.

The design and user interface of the Hotpoint DF55 and DF56 also deserve mention. With a sleek integrated design, they seamlessly fit into any kitchen decor, maintaining a uniform look. The electronic control panel is user-friendly, allowing users to easily navigate through the different settings and options. Furthermore, the low noise level of these machines makes them ideal for open-plan living spaces, letting users run cycles without disturbing the household.

Another notable aspect is the adjustable racks within the dishwasher, which provide flexibility when loading dishes of various sizes. The cutlery tray enhances organization and ensures that every utensil is properly cleaned.

In conclusion, the Hotpoint DF56 and DF55 are designed to meet modern household needs with their blend of capacity, energy efficiency, and advanced technologies. These dishwashers offer plenty of useful features that simplify dishwashing while ensuring top-notch cleaning results.