Important Information...
Going Away:
If the appliance is not going to be used for some time carry out the following:
●Run the pre wash programme, twice in succession.
●Switch of at the electrical socket and unplug.
●Turn off the water supply tap, disconnect the intake hose and allow to drain.
●Fill the rinse aid dispenser.
●Leave the door open, to prevent any unpleasant odours inside the dishwasher.
Before using the dishwasher after a long break, plug in and switch on at the electrical socket. Reconnect the intake hose and turn on the water supply tap. Check there are no deposits or rust inside the water pipe, if there are allow water to run from the water supply tap for a few minutes.
Disconnecting the Dishwasher...
When disconnecting the appliance it is important that tasks are carried out in the correct sequence:
-Switch off at the mains and remove the plug from the socket.
-Turn off the water supply.
-Disconnect drain and water intake hose.
-Pull out the appliance, carefully, withdrawing hoses at the same time.
Transporting the Dishwasher...
Drain water from the dishwasher. Secure all loose parts. Only transport in an upright position.
-If not kept upright during transport, any water remaining inside, may seep into the control module and cause subsequent errors with programme functions.
CE marking certifies that this appliance conforms to the following EEC directives:
Low Voltage Equipment 72/23/EEC Electromagnetic Compatibility 89/336/EEC and subsequent modifications.
22
