Hotpoint EG1000GX Care and Cleaning, Cooker Finish, Cleaning Method, Vitreous Enamel, Aluminium

Care and Cleaning

COOKER FINISH	CLEANING METHOD
		GB
Vitreous Enamel	Cloth wrung out in warm soapy water. Stubborn stains can be removed
Hotplate (Traditional), pan supports,	with a cream paste, liquid cleaner or by rubbing with fine steel wool
burner caps, roasting dish, grill pan, oven	soap pads e.g. Brillo, Ajax.
base, rear and roof, door inner panels,	Check that the cleaning agent is approved by the Vitreous Enamel
grill and warming compartments.	Association.
Aluminium	Similar to paint cleaning above. Use a nylon brush to remove any
Burner bodies, door handles.
	cleaning materials, water or dirt from the hotplate burner ports. Care
	should be taken when refitting the bodies over the electrodes.
Glass	As for enamel cleaning. Polish with a clean dry cloth or kitchen roll.
Chromium Plating
Oven shelves, grill pan grid, grill pan	Wipe with a cloth wrung out in warm soapy water. A fine steel wool soap
handle support.	pad e.g. Brillo, Ajax, or a chrome or stainless steel cleaner may be used.
Plastic
Grill pan handle, control knobs, door	Wipe with a cloth wrung out in warm soapy water.
handle supports.
Stainless Steel	Wipe with a cloth wrung out in warm soapy water. Polish with a clean
Door trims, control panel, hotplate
	dry cloth or kitchen towel. For stubborn stains, use a proprietary stainless
	steel cleaner and follow the instructions on the container.
Paint
Side panels	Wipe with a cloth wrung out in warm soapy water only. DO NOT USE
	ABRASIVES.
Ceramic	Use a ceramic hob cleaner-conditioner whenever cleaning is done. The
	cleaner-conditioner forms a protective film on the hob and contains a
	mild detergent which makes cleaning easir.
	A cleaner-conditioner can be obtained either through a local Service
	Centre or retailer, part number 6004.
	To clean off stubborn stains the following can be used when the surface
	has cooled:
	1. Cif, non-scratch cream cleaner.
	2. Heavy soil can be removed from the surface by carefully using a
	glass scraper.
	3. Hard water stains, grease spots and any discolouration having a
	metal sheen can be removed with Solvol Autosol Super or any non
	abrasive stainless steel cleaner.
	After cleaning, always use the cleaner-conditioner and finish it off by
	polishing with a clean, dry paper towel. Never use abrasive chemical
	oven cleaners as they can damage the surface of the hob.
	The visual effect of scratches which may occur in use can be minimised
	by the use of the cleaner-conditioner. Such scratches cannot be
	removed but do not affect the function of the hob in any way.

19