Hotpoint EG52 Clock/Minute Minder Operation, Clockface, Symbols, Setting The Time Of Day, 0.00A

CLOCK/MINUTE MINDER OPERATION

0.00A

U

T

O

CLOCKFACE

The timer incorporates a 24 hour clock.

Ensure the correct time of day is always set before using your cooker.

PLEASE NOTE THAT THE DISPLAY WILL DIM BETWEEN 22.00 HOURS AND 06.00 HOURS TO PREVENT GLARE.

However, should you operate the timer during these hours the display will return to normal brightness for a few seconds and then dim again.

0.00A

U

T

0.00O

A

U

T

12.00O

SYMBOLS

will light up when you select a Minute Minder Period and will remain lit for the period set. At the end of the Minute Minder Period, the timer will emit an audible tone for 2 minutes, the symbol will start to flash and will continue to flash until the Minute Minder function is cancelled.

SETTING THE TIME OF DAY

Step 1 Make sure all oven controls are turned off.

Step 2 Check the electricity supply to the cooker is turned on.

Step 3 When switched on, the display will show 0.00 / AUTO.

THIS NEXT STEP SHOULD BE COMPLETED WITHIN 4 SECONDS...

Step 4 Press and release both the ‘+’ and ‘-’ buttons together. Press the ‘+’ button and the display will show 12.00

Then press the ‘+’ or ‘-’ button to set the correct time of day.

THE TIME OF DAY IS NOW SET.To change the time of day repeat Step 4 above.

NB.

If at any time the display shows a ‘KEY’ symbol, the operation of the timer is unaffected.

The ‘KEY’ symbol can be deleted by pressing both buttons for a period of approximately 8 seconds, followed by a single press of the ‘+’ button.

6