Connecting the water supplies

EN

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet (A) and outlet (B) hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation (see figure).

To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

Ensure the fill hose is only fitted to the cold water supply. DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Standpipe

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with ‘retaining flaps*’, ensure they are inserted fully into the standpipe. This will prevent the pipe from jumping out during installation and use.

DO NOT position the standpipe near an electrical outlet.

ENSURE that the drain hose is not kinked and it is routed as shown in the diagram.

The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your household sink.

It MUST NOT be connected to a surface water drain.

*Only available in selected models.

4

Page 4
Image 4
Hotpoint FDF 784 manual Connecting the water supplies

FDF 784 specifications

The Hotpoint FDF 784 is a sophisticated and efficient dishwasher designed to meet the demands of modern kitchens. With its stylish appearance and abundance of innovative features, this appliance stands out as a reliable choice for households seeking cleanliness and convenience.

One of the key features of the Hotpoint FDF 784 is its energy efficiency. It operates with an impressive energy rating, allowing users to save on their energy bills while protecting the environment. This appliance uses advanced washing technologies, incorporating an Eco mode that optimizes water usage and energy consumption, making it an eco-friendly option for conscientious consumers.

The FDF 784 also boasts a generous capacity, accommodating up to 14 place settings. This is ideal for families and those who frequently entertain guests, ensuring that there's ample space to tackle even the largest loads. The interior is thoughtfully designed, with adjustable racks and a flexible layout that can be customized to fit various dish sizes and shapes. This versatility ensures that every item, from delicate glassware to bulky pots and pans, can be washed effectively.

In terms of cleaning performance, the Hotpoint FDF 784 does not disappoint. It features several wash programs, including a powerful intensive cycle for heavily soiled items and a quick wash option that gets dishes clean in under 30 minutes. The appliance is equipped with a sensor technology that detects soil levels and adjusts the wash cycle accordingly, ensuring optimal cleaning results while conserving water and energy.

The appliance also includes a unique AirDry technology that enhances the drying process. This innovative system uses the natural flow of air to improve drying efficiency and reduce water spots on dishes, ensuring they come out not only clean but also ready to be put away immediately.

Safety is paramount in any kitchen appliance, and the Hotpoint FDF 784 is no exception. It comes with a child lock feature that prevents accidental interruptions during wash cycles, providing peace of mind for families with young children.

Overall, the Hotpoint FDF 784 combines efficiency, flexibility, and innovative technologies to deliver a first-class dishwashing experience. Whether you're dealing with everyday dinnerware or post-party cleanup, this dishwasher proves itself as a valuable asset to any kitchen.