The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Electrical Connection

Before inserting the plug into the electrical socket, make sure that:

the socket is earthed and complies with current regulations;

the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

the power supply voltage falls within the values indicated on the data plate on the inside of the door;

the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see After Sales Service); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See After Sales Service)

This appliance must be earthed

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is fitted.

Changing the Plug

EN

Cut off and dispose of the supplied plug if it does not fit your socket.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH ‘E’ or

NEUTRAL ‘N’

LIVE ‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service

UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current- operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/ 240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

3

Page 3
Image 3
Hotpoint FDM550PR manual Electrical Connection

FDM550PR specifications

The Hotpoint FDM550PR is a stylish and functional freestanding dishwasher designed to enhance the efficiency of your kitchen. This model stands out for its impressive capacity and array of features, making it a great choice for both families and individuals who value convenience and performance.

One of the key characteristics of the Hotpoint FDM550PR is its generous capacity. With an ability to accommodate up to 13 place settings, it is well-suited for handling the demands of a busy household. The adjustable upper basket allows users to customize the layout to fit larger pots and pans, optimizing space and ensuring that every dish comes out sparkling clean.

The dishwasher features multiple wash programs, including intensive and eco modes, which cater to different cleaning needs. The intensive program is ideal for heavily soiled dishes, while the eco mode is designed to conserve energy and water, making it a more environmentally friendly option.

Hotpoint has incorporated advanced technologies into the FDM550PR that enhance its performance and user experience. The model employs a robust filtration system that helps prevent food particles from redepositing on your clean dishes, ensuring a thorough and consistent wash every time. The Quiet Operation feature is another highlight, allowing the appliance to run at a low noise level, which is particularly beneficial for open-plan living spaces or nighttime use.

In terms of energy efficiency, the Hotpoint FDM550PR is rated highly, helping users save on electricity and water bills while also being kind to the planet. Its energy-efficient design does not compromise on performance, allowing for effective cleaning results with a lower environmental impact.

Furthermore, the machine is designed with user convenience in mind. The easy-to-use digital display shows the remaining cycle time, making it simple to track progress. The delay start feature allows users to set the dishwasher to run at a more convenient time, such as during off-peak hours.

Overall, the Hotpoint FDM550PR is an excellent choice for those seeking a reliable, efficient, and stylish dishwasher. With its combination of advanced features, ample capacity, and energy-efficient design, it is poised to meet and exceed the expectations of modern households.