Installation

Keep this instruction manual in a safe place for

EN

future reference. If the appliance is sold, given away or

 

 

moved, please ensure the manual is kept with the

 

machine, so that the new owner may benefit from the

 

advice contained within it.

 

 

Please read this instruction manual carefully: it

 

 

 

contains important information regarding the safe

 

installation, use and maintenance of the appliance.

 

 

If the appliance must be moved at any time, keep it

 

 

 

in an upright position; if absolutely necessary, it may be

 

tilted onto its back.

This appliance is intended to be used in household and similar applications such as:

-staff kitchen areas in shops, offices and other working environments;

-farm houses;

-by clients in hotels, motels and other residential type environments;

-bed and breakfast type environments.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or

even with the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction

sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4*. Adjust the height of the rear foot from the front of the appliance* on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation that may form.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off.

If the salt container is not filled, the water softener and the heating element may be damaged as a result.

Technical data

Dimensions

width 60 cm

height 85 cm

 

 

 

depth 60 cm

Capacity

12 standard place-settings

 

 

Water supply

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

pressure

7,25 – 145 psi

Power supply

See appliance data plate

voltage

 

 

 

Total absorbed

See appliance data plate

power

 

Fuse

See appliance data plate

 

 

 

 

 

 

 

This dishwasher conforms to the

 

 

 

following European Community

 

 

 

Directives:

 

 

 

-2006/95/EC (Low Voltage)

 

 

 

-2004/108/EC (Electromagnetic

 

 

 

Compatibility)

 

 

 

-2005/32/EC (Comm. Reg.

 

 

 

1275/2008) (Ecodesign)

 

 

 

-97/17/EC (Labelling)

 

 

 

-2002/96/EC (Waste Electrical

 

 

 

and Electronic Equipment)

 

 

 

(WEEE)

 

 

 

*Only available in selected models.

2

Page 1 Page 3
Page 2
Image 2
Hotpoint FDM550PR Installation, Positioning and levelling, Advice regarding the first wash cycle, Anti-condensation strip
Page 1 Page 3

FDM550PR specifications

The Hotpoint FDM550PR is a stylish and functional freestanding dishwasher designed to enhance the efficiency of your kitchen. This model stands out for its impressive capacity and array of features, making it a great choice for both families and individuals who value convenience and performance.

One of the key characteristics of the Hotpoint FDM550PR is its generous capacity. With an ability to accommodate up to 13 place settings, it is well-suited for handling the demands of a busy household. The adjustable upper basket allows users to customize the layout to fit larger pots and pans, optimizing space and ensuring that every dish comes out sparkling clean.

The dishwasher features multiple wash programs, including intensive and eco modes, which cater to different cleaning needs. The intensive program is ideal for heavily soiled dishes, while the eco mode is designed to conserve energy and water, making it a more environmentally friendly option.

Hotpoint has incorporated advanced technologies into the FDM550PR that enhance its performance and user experience. The model employs a robust filtration system that helps prevent food particles from redepositing on your clean dishes, ensuring a thorough and consistent wash every time. The Quiet Operation feature is another highlight, allowing the appliance to run at a low noise level, which is particularly beneficial for open-plan living spaces or nighttime use.

In terms of energy efficiency, the Hotpoint FDM550PR is rated highly, helping users save on electricity and water bills while also being kind to the planet. Its energy-efficient design does not compromise on performance, allowing for effective cleaning results with a lower environmental impact.

Furthermore, the machine is designed with user convenience in mind. The easy-to-use digital display shows the remaining cycle time, making it simple to track progress. The delay start feature allows users to set the dishwasher to run at a more convenient time, such as during off-peak hours.

Overall, the Hotpoint FDM550PR is an excellent choice for those seeking a reliable, efficient, and stylish dishwasher. With its combination of advanced features, ample capacity, and energy-efficient design, it is poised to meet and exceed the expectations of modern households.
Top Page Image Contents