Hotpoint FDYB 10011, FDYB 11011 manual Wash cycles

Wash cycles

Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.

GB Based on the different conditions of use, the wash-cycle duration and data can change.

The number and type of wash cycles and options may vary depending on the dishwasher model.

			Wash Cycle	Water	Energy
Wash Cycle	Drying	Options		Consumption (l/	Consumption
			Duration
				cycle)	(kWh/cycle)
Eco	Yes	No	03:10’	11	1,04
Intensive	Yes	No	02:30’	16,5	1,65
Normal	Yes	No	02:00’	16,0	1,3
Fast	No	No	01:00	11,5	1,1
Delicate	Yes	No	01:30	12	1,1

Instructions on wash-cycle selection and detergent dosage

1.The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. 27 gr/ml + 6 gr/ml** – 1 Tab (**Quantity of pre-washing detergent)

2.Heavily soiled dishes and pans (not to be used for delicate items). 30 gr/ml – 1 Tab

3.Normally soiled pans and dishes. 27 gr/ml + 6 gr/ml** – 1 Tab

4.Limited quantity of daily soiling (ideal for 4 place settings) 25 gr/ml – 1 Tab

5.Cycle for delicate items, which are more sensitive to high temperatures 30 gr/ml – 1 Tab

Standby consumption: Left-on mode consumption: 5,0 W - Off mode consumption: 0.5 W

Notes:

Optimum performance levels when using the “Fast” cycle can be achieved by respecting the specified number of place settings. To reduce consumption even further, only run the dishwasher when it is full.

Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.com

12