Installation

 

! Before operating your new appliance, please read

GB

these operating instructions carefully. They contain

 

important information for safe use, installation and care

 

 

of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the airflow under and behind the appliance. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Ensure the appliance is far away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After transportation of the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V, 50Hz).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see After Sales Service). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see After Sales Service).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

2

Page 1 Page 3
Page 2
Image 2
Hotpoint FF200LK, FF200LG, FF200LA, FF200LP Installation, Positioning and connection, Electrical connections
Page 1 Page 3

FF200LK, FF200LP, FF200LA, FF200LG specifications

The Hotpoint FF200 range of refrigerators, including the FF200LA, FF200LG, FF200LP, and FF200LK models, is designed to cater to the diverse needs of modern households. Known for their efficiency and functionality, these refrigerator models incorporate advanced technologies to enhance user convenience while maintaining food freshness.

One of the standout features of the FF200 models is their generous storage capacity. With a spacious design, these refrigerators provide ample room for groceries, making organization easy. Adjustable shelves and door bins allow users to customize the interior layout according to their preferences, accommodating items of various sizes.

Energy efficiency is another key characteristic of the Hotpoint FF200 series. These refrigerators boast an A+ energy rating, which translates to lower electricity bills and a reduced carbon footprint. By integrating energy-saving technologies, Hotpoint ensures that users can keep their food chilled without excessive energy consumption, making it an environmentally friendly choice.

The advanced cooling system featured in the FF200 models helps maintain optimal temperatures throughout the fridge and freezer sections. This technology ensures that food stays fresher for longer, reducing waste and preserving taste and nutritional value. Additionally, the frost-free operation eliminates the need for manual defrosting, saving time and effort for busy households.

In terms of design, the FF200 range is available in various colors, including sleek black, classic white, and modern silver finishes, allowing it to blend seamlessly with any kitchen decor. The ergonomic door handles and user-friendly interfaces enhance accessibility and ease of use.

Safety features are also a priority in the Hotpoint FF200 series. Each model is equipped with a temperature alarm that alerts users if the internal temperature rises, providing peace of mind concerning food safety.

Overall, the Hotpoint FF200LA, FF200LG, FF200LP, and FF200LK models embody a harmonious blend of style, efficiency, and practicality, making them suitable for any household looking to simplify their food storage and preservation needs. With their thoughtful design and advanced features, these refrigerators set a standard in the appliance market that prioritizes both function and energy conservation.
Top Page Image Contents