Gas connection

The cooker should be connected to the gas-supply by a corgi registered installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing. Connection of the appliance to the gas mains or liquid gas must be carried out according to the prescribed regulation in force, and only after it is ascertained that it is adaptable to the type of gas to be used. If not, follow the instructions indicated in the paragraph headed “Adaptation to different gas types”. On some models the gas supply can be connected on the left or on the right, as necessary; to change the connection, reverse the position of the hose holder with that of the cap and replace the gasket (supplied with the appliance). In the case of connection to liquid gas, by tank, use pressure regulators that conform to the regulation in force. The gas supply must be connected to the left of the appliance. Be sure that the hose does not pass through the rear of the cooker touching hot parts.

HOT PARTS

600 mm

Important: make sure the supply pressure conforms with the values shown in the table entitled “Caracteristics of the burners and nozzles”. When the cooker is installed between cabinets (recessed), the gas connection must be effected by an approved flexible hose with bayonet fitting (BS 669 Current Edition).The gas inlet for the cookers is a threaded G 1/2 gas female fitting.

Connecting the gas supply

To make the connection, a flexible hose should be used corresponding to the current gas regulations which are:

•the hose must never be at any point in its lenght in contact with the “hot” parts of the cooker;

•the hose must never be longer than 1,5 metre;

•the hose must not be subject to any tension or torsional stress and it must not have any excessively narrow curves or bottlenecks;

•the hose must be easy to inspect along its entire length to check its condition;

•the hose must always be in good condition, never attempt to repair.

Important: the installation must comply with gas safety (installation and use) regulations 1984. In all cases for the above, by low, a qualified, corgi approved engineer must be called for installation.

Important: Before using the oven, position the oven burner deflector "A" (provided with the appliance) in the correct place by inserting the lower tab into the support slot (see figure).

A

5

Page 4 Page 6
Page 5
Image 5
Hotpoint GW38G, GW38P, GW38K, GW38X manual Gas connection, Connecting the gas supply
Page 4 Page 6

GW38X, GW38K, GW38G, GW38P specifications

The Hotpoint GW38 series represents a range of advanced appliances in the world of kitchen technology, showcasing innovative features and stylish designs. The models GW38P, GW38G, GW38K, and GW38X are designed to meet the diverse needs of modern households while ensuring efficiency and reliability.

One of the standout characteristics of the GW38 series is its exceptional cooking performance. Each model is equipped with powerful heating elements that ensure quick and even heating, allowing users to achieve perfect cooking results every time. The precise temperature control enables users to prepare a variety of dishes, from delicate sauces to perfectly roasted meats.

In terms of design, the Hotpoint GW38 series boasts a sleek and contemporary aesthetic. With a variety of color options available, including classic white, stylish graphite, sophisticated black, and modern metallic finishes, the appliances can effortlessly complement any kitchen décor. The user-friendly interface features intuitive controls and a digital display, making it easy to monitor settings and cooking times.

The GW38 series also incorporates advanced cooking technologies aimed at enhancing the user experience. Features like multifunctional cooking options allow users to choose between various cooking methods, including baking, grilling, and steaming. The innovative steam function is particularly noteworthy, as it adds moisture to dishes, resulting in juicier and healthier meals.

Another significant advantage of the GW38 models is their energy efficiency. Designed with sustainability in mind, these appliances consume less energy without compromising performance. This not only helps in reducing the impact on the environment but also contributes to lower utility bills for consumers.

Safety is a paramount concern in kitchen appliances, and the Hotpoint GW38 series addresses this with numerous safety features. Child lock functions, automatic shut-off, and cool-touch surfaces ensure a safe cooking environment, making it suitable for homes with young children.

Moreover, the easy-to-clean interiors and removable components simplify maintenance, allowing users to keep their appliances in top condition effortlessly. This combination of style, performance, and convenience makes the Hotpoint GW38 series a valuable addition to any modern kitchen, meeting both aesthetic desires and practical needs. With the Hotpoint GW38 series, users can enjoy a seamless cooking experience, combining tradition with innovation.
Top Page Image Contents