INSTALLATION INSTRUCTIONS
UNPACKING THE COOKER
Unpack the components from inside the grill and oven: Check that the following parts are present.
Grill pan and grid | Top oven/grill shelf heat shield |
Baking dish | Pan supports (4) |
Main oven shelves (2) | Enamelled discs (4) |
Top oven/grill shelf (1) | Literature |
LEVELLING
Two rear wheels and two front feet are fitted which can be adjusted up or down to level the cooker. The front feet can be screwed in or out and the rear wheels raised or lowered from the front of the cooker by adjusting the levelling screws in the front of the plinth.
CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully.
STABILITY BRACKET
The cooker must be fitted with a stability device firmly secured to the fabric of the building. The back of the cooker has a slot for engagement of a stability bracket, which can be obtained, as an extra, from your cooker supplier.
125mm
STABILITY
BRACKET
POSITION
REAR OF
COOKER
SLOT FOR STABILITY BRACKET
31