Control Settings
Cycles
POTS & PANS/ For heavily soiled dishes or cookware with
NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter soil than normal. Choosing a cycle other than NORMAL WASH will save energy and water.
SHORT WASH For quickly washing loads of everyday dishes with medium soils that have not dried on, such as loads consisting mostly of glasses.
LIGHT WASH/ For dishes with light soils.
WATER SAVERRINSE & HOLD For rinsing partial loads that will be washed later.
Do not use detergent.PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.
Energy Options
HI TEMP Provides extra heat for best performance. It is used best with WASH ON/
HI TEMP Turns HI TEMP WASH off.
WASH OFFHEATED DRY/ Turns the heating element on for fast drying. This option will extend HEATED DRY ON the time of your wash cycle.
HEATED DRY OFF Turns HEATED DRY off. Dishes air dry naturally and energy is saved.
ENERGY SAVER Turns all options off.
Start
Slowly turn the Dial to the START or ON position, or the selected cycle. Don’t turn it past the START, ON or cycle position, or you could accidentally miss a rinse. For models HDA2120 and HDA2130, when using the POTS & PANS cycle, slowly turn the Dial to the NORMAL/POTS
&PANS position and press the POTS & PANS ON button. When using the NORMAL cycle, slowly turn the Dial to the NORMAL/POTS & PANS position and press the POTS & PANS OFF button. See About the Dial Cycles section for other cycles on these models.
There is a time delay between
■ Latch the door to begin the cycle. | 9 |
|
Safety Information
Operating Instructions
Troubleshooting Tips
Customer Service
