Hotpoint HDA950G manual For Pots & PANS, Normal Wash and Light Wash cycles

How to operate your dishwasher Door LatchCycle Indicator Dial

7--

f

PQISNOHMAILIGH1 wA1ER1fuP800s1 DRYING HCA1

hp~N$ W4SH WASH ON OPF ON 0,6

~m

wtwasher

.,, h..,., ,.mo k.,

* #

J

STEP 1. Load your dishwasher with dishes, silverware, pots, pans, bowls, etc. according to instructions on pages 8 and 9.

STEP 2. Add detergent to the detergent dispenser. Make sure the Cycle Indicator Dial is at OFF position before adding detergent. (See pages 6 and 7.)

Use rinse aid agent to help prevent spotting. (See page 6.)

STEP 3. Select DRYING HEAT Option. It must be ON for PLATE WARMER cycle, OFF for RINSE HOLD cycle. It can be ON or OFF, at your option (see below), for any of the wash cycles.

I	DRYING HEAT		I
	ON	OFF

ON. Turns the drying heater on for fast drying.

OFF. Turns the drying heater off to save energy. Dishes will dry naturally over a longer period such as overnight.

If you need your dishes sooner, open the dishwasher door after the cycle is complete to reduce the natural drying time.

Use of this option reduces the electrical energy used by this model approximately 8% for the NORMAL WASH cycle.

STEP 4. Select WATER TEMP BOOST Option.

WATER TEMP BOOST

ON OFF

ON: The wash cycle may be extended while the dishwasher automatically heats the water for good washing and drying. The entering water must be at least 120°F.

OFF: The entering water must be at least 140~

STEP 5. Select the cycle and start the dishwasher.

If your dishwasher drains into a food waste disposer, operate the disposer until it is empty before starting the dishwasher. (See Cycle Selection Hints at right.)

To obtain the benefits of a complete cycle, be careful that you do not turn the dial any further than necessary to start the dishwasher.

●For POTS & PANS, NORMAL WASH and LIGHT WASH cycles:

POTS NORMAL LIGHT

&PANS WASH WASH

a.Push selected cycle button.

b.Latch the door.

		.	RINSE
ON ■	8		HOLD
OFF ■		,.,JS. W”I.G.F.,
			,,,, w, ,”.,

@

■ PMTE WARMER (“.s””””!.l. .!.1 “. ,“,,”. ,

c. Slowly turn Cycle Indicator Dial to ON position to start the cycle. There is a time delay between start-up and water fill so you will not hear any wash action right away.

●For RINSE HOLD cycle:

a. Be sure door is unlatched.

b. Select DRYING HEAT-OFF drying option.

ON m

OFF ■

c. Slowly turn Cycle Indicator Dial to RINSE HOLD position.

d. Latch the door to start the cycle.

4