~
m Questions?
~ Use This Problem Solver
~
PROBLEM
DISHWASHER
WON’T RUN
UNUSUAL NOISE
DISHES DON’T DRY
UNCLEAN DISHES AND F~WARE
BLACK OR GRAY MARKS ON DISHES
DETERGENT LEFT IN DISPENSER CUPS
POSSIBLE CAUSE AND REMEDY
A fuse in your home maybe blown, or the circuit breaker tripped. Replace fuse or reset circuit breaker. Remove any other appliances from the circuit.
Utensils may not be secure on rack pins. Or something small may have dropped from the rack. Water is causing utensils to rattle. Make sure everything is securely placed in dishwasher.
Make sure inlet water temperature is correct. (Seepage 6.)
Udoad the bottom rack first. Water from dishes in the top rack maybe spilling into the bottom rack.
Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.
Check idet water temperature. It should beat least 120°F. (To test, seepage 6.)
~obtain the benefits of a complete cycle, be careful that you do not turn the Wd any further than neceary to start the dishwasher.
Water pressure may be temporarily low. ~m on a faucet. Is water coming out slower than usual? If so, wait until pressure is normal before using your dishwasher.
Plugged air gap. (See page 11.)
Improper rack loading. (See pages 8 and 9.)
Aluminum deposits often leave marks when they rub against other things. Remove marks with a mild abrasive cleanser.
Water may not be reaching the detergent cups. Move dishes that maybe blocking detergent cup.
The dispenser cover may not be opening or may be blocked by improperly loaded items. If you used a powder detergent, open the cup and remove any
Detergent may be old. If the powder detergent is hard or caked in the box, throw it away. The detergent may not be working well. Try another brand.
12