65 100 cm | Hotpoint HF6B 351 specs

Connecting the drain hose

	• the supply voltage is included within the values indica-	GB
	ted on the Technical Data Plate fixed on the machine.	GB
	ted on the Technical Data Plate fixed on the machine.

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

•the socket is compatible with the washing machine’s plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connec- ting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be underwater.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through parti- tions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere rewireable plug bearing the BSI mark of approval.

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length. Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machi- ne to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the appli- cable law;

•the socket is able to sustain the appliance’s maximum power load indicated on the Technical Data Plate fixed on the machine;

or:

the mains cable is wired directly into a 13 amp cable out- let, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	Earth
Blue	Neutral
Brown	Live

HF6B 351 specifications

The Hotpoint HF6B 351 is a sleek and modern freestanding refrigerator that combines style and efficiency, making it an excellent choice for any contemporary kitchen. This model is designed with a focus on convenience, exceptional food preservation, and energy savings.

One of the standout features of the Hotpoint HF6B 351 is its generous storage capacity. With a total volume of around 350 liters, it provides ample room to store a variety of groceries and perishables. The fridge compartment boasts adjustable shelves, allowing users to customize the space to accommodate larger items like pizzas or tall bottles. The organized layout includes dedicated fruit and vegetable drawers, designed to keep produce fresh and easily accessible.

This refrigerator incorporates advanced cooling technologies that enhance food preservation. The No Frost technology prevents the formation of ice, eliminating the need for manual defrosting, which can be a tedious task. The even distribution of cold air throughout the compartment helps to maintain stable temperatures, ensuring that food stays fresh for longer periods.

Energy efficiency is another important characteristic of the Hotpoint HF6B 351. Rated with a high energy efficiency class, this appliance consumes less electricity, helping users save on their energy bills while also being environmentally friendly. The Eco function is a useful feature that optimizes performance during periods of low usage, further enhancing energy savings.

The design of the HF6B 351 includes a sleek stainless steel finish, making it a stylish addition to any kitchen decor. The user-friendly digital display allows for easy temperature adjustments and settings, providing an intuitive experience. With its reversible door feature, this refrigerator can be placed in various kitchen layouts without limitations.

In summary, the Hotpoint HF6B 351 is a thoughtfully designed refrigerator that combines style, efficiency, and advanced preservation technologies. With its spacious interior, innovative cooling features, and energy-efficient performance, it stands out as a reliable choice for households seeking to keep their food fresh and organized. Its modern aesthetics and practical functionalities make it a must-have appliance in the heart of the home.

Hotpoint HF6B 351 manual 65 100 cm

Models: HF6B 351