Hotpoint HF6B 351 manual Personalisation, Setting the temperature, Functions

Models: HF6B 351

1 16
Download 16 pages 19.85 Kb
Page 9
Image 9

Personalisation

Setting the temperature

 

GB

Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).

 

The temperature may be lowered, or even set to a cold wash ( ).

 

The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value

 

set for each wash cycle.

 

!Exception: if the programme is selected, the temperature can be increased up to a value of 90°C.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time. To activate the functions:

1.Press the button corresponding to the desired function;

2.the function is enabled when the corresponding indicator light is illuminated.

Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle.

Spin Exclusion

The washing machine will not carry out the spin cycle, but rather a drum spin at medium speed to assist water draining. Recommended when washing garments which are difficult to iron.

!This function may not be used in conjunction with wash cycles 7, 14.

Reduced Creases

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine will perform slow rotations of the drum; the REDUCED CREASES and START/PAUSE indi-

cator lights will flash (orange) and the phase will remain lit in a fixed manner. To end the cycle, press the START/PAUSE button or the REDUCED CREASES button.

!This function may not be used in conjunction with wash cycles 1, 2, 7, 11, 13, A, B.

Extra rinse

By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly useful for sensitive skin.

!This function may not be used in conjunction with wash cycles 7, 11, 14, B.

Super Wash

Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this function offers a high-performance wash.

!This function may not be used in conjunction with wash cycles 2, 7, 10, 11, 13, 14, B.

9

Page 9
Image 9
Hotpoint HF6B 351 manual Personalisation, Setting the temperature, Functions