Installation, Electrical hook up | Hotpoint HHC6.7ABK, HHC9.7AB

Installation

Ducted version	GB

The installation procedure is illustrated in the ﬁrst pages of this manual.

The installation must be done by a qualiﬁed technician.

Electrical hook up

The mains voltage must match that given on the ratings label inside the hood itself. If the hood has a power plug, connect the hood to an easily accessible regulatory power socket. If it does not (direct connection to the mains), or the socket is not easily accessible, install a two-pole regulatory switch to enable total disconnection from the mains in case of category III overvoltage, as required by the installation regulations.

Caution! Always check that the mains cable is hooked up properly and check that it operates correctly before reconnecting the hood to the mains.

Air exhaust (for ducted units)

Connect the hood to a duct and wall exhaust hole of a diameter equal to that of the air outlet ﬂange. Using a smaller diameter tube and exhaust hole reduces the extraction capacity of the hood and also increases its running noise. The manufacturer is not liable for any consequences of doing so.

!Use the shortest duct required to achieve the purpose.

!Use a duct with as few bends as possible

!Avoid suddenly changing the diameter of the duct.

!The duct must have as smooth an inner surface as possible.

!The duct must be made of regulatory material.

!Do not connect the hood to ﬂues carrying combustion fumes from other equipment (boilers, chimneys, stoves, etc.).

!Observe the instructions of the competent authorities in relation to the air exhaust. The air being exhausted may not be exhausted into a wall cavity unless the cavity in question is speciﬁcally intended for this purpose.

!Equip the room with air intakes to prevent the hood creating suction pressure in the interior (this must not exceed 0.04 mbar).

!The manufacturer is not liable for any consequences of failure to observe these instructions.

The hood puriﬁes the air and expels it outdoors via an exhaust duct (dia. 150mm) connected to its outlet ﬂange. The diameter of the exhaust tube must be equal to that of the outlet ﬂange.

Caution! The exhaust duct is not supplied and must be purchased separately.

When routed horizontally, the tube must be angled slightly upwards (around 10°) to enable the air to be conveyed outdoors more easily. If the hood is ﬁtted with charcoal ﬁlters, they must ﬁrst be removed.

Filter version

The hood puriﬁes the air and returns it to the room. This version of the hood requires installation of an accessory active charcoal ﬁlter unit.

This version requires an air deﬂector, a reduction adapter and the charcoal ﬁlter/s. The top tube must have its air outlet slots uppermost.

Technical data

	Height	Width	Depth	dia. of
Model	Height	Width	Depth	exhaust tube
Model	(cm)	(cm)	(cm)	exhaust tube
	(cm)	(cm)	(cm)	(cm)
				(cm)
CHIMNEY 60cm	61-82	59.8	50	15/12

CHIMNEY 90cm	61-82	89.9	50	15/12

Please check the plate in order to verify the total absorption and the light absorption

	Power	Voltage	Cap	Dimensions

Halogen 25 W	2 x 25 W	230 V	G9	L40xØ14

Halogen 20 W	2 x 20 W	12 V	G4	L30xØ10

LED * Risk Group 1 according to Standard EN 62471

The model is in accordance with the following EU directives::

•“Low voltage” Directive 2006/95/EC (12-12-2006)

•“EMC” Directive 2004/108/EC (15-12-2004)

•UR Reference no. 66/2014 integrating Directive no. 2009/125/EC.

Filter or ducted?

!Your hood is supplied as a ducted unit.

If you wish to use it as a ﬁlter unit, you must install the proper

ACCESSORY KIT.

Note: If supplied with the hood, the accessory active charcoal ﬁlter unit may already be installed.

Instructions for transforming the hood from the ducted to the ﬁlter version are given in this manual (see “Filter version”).

Reference standard:

•EN 60704-2-13:2011; EN 60704-3:2006

•EN 61591:1997; EN 61591:1997/A1:2006; EN 61591:1997/ A2:2011; EN 61591:1997/A11:2014

•EN 50564:2011

*Only available in certain models

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

HHC9.7AB, HHC6.7ABK, HHC7.7AB, HHC6.7AB, HHC6.7ABI specifications

Hotpoint, a reputable brand in the world of home appliances, has made a significant impact with its range of built-in cooking hobs, specifically the models HHC6.7ABI, HHC6.7AB, HHC7.7AB, HHC6.7ABK, and HHC9.7AB. These hobs are designed to enhance cooking experiences by integrating advanced technology with user-friendly features.

The HHC6.7ABI model boasts a sleek and elegant design, featuring a stainless steel finish that complements any modern kitchen décor. It includes five cooking zones, each equipped with high-efficiency burners that provide rapid heat for quicker cooking times. The hobs are equipped with an automatic ignition system, allowing users to light the burners effortlessly with a simple turn of the control knob. Safety is prioritized with flame failure devices that automatically shut off the gas if the flame goes out.

Similarly, the HHC6.7AB model offers comparable features but also includes additional touch control settings that allow for a customizable cooking experience. This model stands out with its smooth ceramic surface, making it not only stylish but also easy to clean after use. Furthermore, a built-in timer helps users manage cooking times more effectively.

The HHC7.7AB model further enhances convenience with its innovative features, integrating a powerful induction cooking zone that provides quick and efficient cooking. Induction technology is known for its energy efficiency as it heats the cookware directly, reducing heat loss and saving energy in the process. This model is particularly favored by those looking for fast cooking solutions without compromising precision.

The HHC6.7ABK and HHC9.7AB models have drawn attention for their robust construction and versatility. The HHC6.7ABK is distinguished by its black glass surface, delivering a contemporary style while ensuring easy maintenance. The HHC9.7AB elevates user convenience with advanced features like programmable settings and multiple cooking zones that cater to various culinary techniques from simmering to searing.

Overall, the Hotpoint hobs combine style, efficiency, and safety, making them an excellent choice for both novice cooks and culinary enthusiasts alike. Each model in this lineup encapsulates modern cooking needs, ensuring that delicious meals can be prepared with ease and pleasure. These hobs are not just appliances; they are essential kitchen companions that reflect the ethos of quality and innovation inherent in the Hotpoint brand.

Hotpoint HHC6.7ABK, HHC9.7AB Installation, Electrical hook up, Technical data, Filter or ducted?

Models: HHC9.7AB HHC6.7ABK HHC7.7AB HHC6.7AB HHC6.7ABI