installing the appliance
5HPRYHWKHSDQVXSSRUWVWKHEXUQHUOLGDQG
ÀDPHVSUHDGHUDQGFDUHIXOO\WXUQWKH appliance upside down and place it on a cushioned mat. 7DNHFDUHWKDWWKH,JQLWLRQGHYLFHVDQGÀDPH supervision devices are not damaged in this operation.
2.Apply the sponge provided around the edge of the appliance.
3.Do not leave a gap in the sealing agent or overlap the thickness.
'RQRWXVHDVLOLFRQVHDODQWWRVHDOWKH
DSSOLDQFHDJDLQVWWKHDSHUWXUH
7KLVZLOOPDNHLWGLI¿FXOWWRUHPRYHWKH
DSSOLDQFHIURPWKHDSHUWXUHLQIXWXUH
SDUWLFXODUO\LILWQHHGVWREHVHUYLFHG
TECHNICAL INSTRUCTION
(A) SEALING STRIP | |
(C) SCREW | (B) BRACKET |
H | H |
| |
H | H |
3ODFHWKHEUDFNHW % RYHUWKHKROHVWKDWPDWFKWKHVL]H of the screws.There are one set of screw holes in each corner of the hob(H).
Slightly tighten a screw(C) through the bracket(B) so that the bracket is attached to the hob, but so that you can still adjust the position.
2.Carefully turn the hob back over and then gently lower it into the aperture hole that you have cut out.
3.On the underneath of the hob, adjust the brackets into a position that is suitable for your worktop.
Then fully tighten the screws(C) to secure the hob into position.
technical instruction_20
