Installation

 

! Before operating your new appliance, please read

GB

these operating instructions carefully. They contain

 

important information for safe use, installation and care

 

 

of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Ensure the appliance is far away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After transportation of the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

4

Page 3 Page 5
Page 4
Image 4
Hotpoint HM312NI manual Installation, Positioning and connection
Page 3 Page 5

HM312NI specifications

The Hotpoint HM312NI is a modern built-in microwave oven that exemplifies convenience and efficiency in kitchen appliances. This model is designed to integrate seamlessly into your kitchen, providing both functional cooking capabilities and a sleek, contemporary aesthetic.

One of the standout features of the HM312NI is its generous capacity of 31 liters, allowing it ample space to accommodate various dishes, including larger meals or multiple servings. This makes it an ideal choice for families or individuals who often prepare substantial quantities of food.

The microwave's power level is an impressive 900 watts, ensuring quick and efficient cooking or reheating. With several power settings, users can adjust the intensity according to the requirements of different dishes, giving you versatility whether you're defrosting, reheating, or cooking from scratch.

Additionally, the Hotpoint HM312NI incorporates several advanced technologies to enhance its usability. The built-in grill function presents users with the option to achieve that perfect crispness on their food. It's particularly beneficial for dishes such as lasagna or gratins, where a golden-brown top is desirable.

Another notable technology is the Turntable system. The microwave features a rotating turntable that ensures even cooking and heating of food items, minimizing cold spots and resulting in more uniformly heated meals.

The electronic touch control panel is user-friendly, featuring clear and concise markings that make it easy to select the desired settings. This feature is complemented by a digital display that offers easy visibility of time and cooking modes, further simplifying the cooking process.

Moreover, the HM312NI is designed with safety in mind, featuring a child lock function to prevent unintentional use by children. This enhances peace of mind for families, making it a safe kitchen appliance.

In terms of energy efficiency, the Hotpoint HM312NI is rated to be energy-saving, which is increasingly important in today's eco-conscious society. This characteristic not only helps reduce electricity bills but also lowers environmental impact.

Overall, the Hotpoint HM312NI microwave combines capacity, power, and innovative features to create an appliance that meets the demands of modern cooking. Its blend of functionality and style makes it a valuable addition to any kitchen, catering to various cooking needs while enhancing the overall cooking experience.
Top Page Image Contents