Hotpoint HME35 manual Maintenance and care, Switching the appliance off, Cleaning the appliance

Models: HME35

1 20
Download 20 pages 19.22 Kb
Page 11
Image 11
Maintenance and care

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply:

1.set the FREEZER OPERATION and APPLIANCE ON/OFF Knob on Off

2.pull the plug out of the socket

!If this procedure is not followed, the alarm may sound. This alarm does not indicate a malfunction. To restore normal operation, it is sufficient to set the FREEZER OPERATION and APPLIANCE ON/OFF knob on the desired value. To disconnect the appliance, follow point 1 and 2.

Cleaning the appliance

The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.

The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.

Avoiding mould and unpleasant odours

The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.

If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.

Holiday function

GB

To minimise energy usage when on holiday, it is not necessary to switch the appliance off. The appliance has a function which allows it to maintain the temperature of the refrigerator compartment at approximately 15°C (which can also be used to conserve make-up and beauty products). The freezer temperature must be set to the minimum value (1) in order to preserve the food. T

11

Page 11
Image 11
Hotpoint HME35 manual Maintenance and care, Switching the appliance off, Cleaning the appliance, Holiday function