Start-up and use
GB
Starting the appliance
! Before starting the appliance, follow the installation |
instructions (see Installation). |
! Before connecting the appliance, clean the |
compartments and accessories well with lukewarm water |
and bicarbonate. |
! The appliance comes with a motor protection control |
system which makes the compressor start approximately |
8 minutes after being switched on. The compressor also |
1 |
2 |
SHELVES•: with or without grill. Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf.
starts each time the power supply is cut off whether |
voluntarily or involuntarily (blackout). |
Once you have plugged the appliance into the mains socket, make sure the display is on (the FREEZER COMPARTMENT knob must not be on Off).
Freezer compartment
When you turn the appliance on (by turning the FREEZER and APPLIANCE ON/OFF Knob to the required freezer compartment operating temperature), we recommend you enable the SUPER FREEZE function to speed up the cooling process inside the compartment; when the latter has reached the optimal temperature, the function will be disabled and you may place the frozen foods inside the freezer.
Refrigerator compartment
When you turn the refrigerator compartment on (by turning REFRIGERATOR OPERATION Knob to the required refrigerator compartment operating temperature), we recommend you enable the SUPER COOL function to speed up the cooling process inside the compartment: after a few hours, you may place food inside the refrigerator.
A.I.R. SYSTEM (Advanced Integrated Refrigeration)
It is recognizable due to the presence of the mechanism on the top part of the refrigerator compartment (see diagram). The A.I.R. System maintains a constant fridge temperature to keep food fresher for longer and will quickly restore the temperature to the correct level, even if the door is opened frequently: the blown air (A) is cooled when it comes into contact with the cold wall, whereas the hotter air (B) is sucked up (see diagram).
B |
A |
•Varies by number and/or position. * Available only on certain models.
8
