ELECTRICAL CONNECTION

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re-

wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-Connect Green and Yellow wire to terminal marked 'E' or or coloured Green and Yellow.

-Connect Brown wire to terminal marked 'L' or coloured red or brown.

-Connect Blue wire to terminal marked 'N' or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

GB

4

Page 4
Image 4
Hotpoint HMT40 Electrical Connection, Replacing fuse covers, Replacement fuse covers, Changing the plug Removing the plug

HMT40 specifications

The Hotpoint HMT40 is a versatile and compact microwave oven that exemplifies modern kitchen convenience and functionality. Designed to meet the cooking needs of today’s households, this model presents a range of features and technologies aimed at providing efficiency and ease of use.

One of the standout features of the Hotpoint HMT40 is its 800 watts of power, which enables quick and efficient cooking, reheating, and defrosting. This power output ensures that meals can be prepared in less time while retaining essential flavors and nutrients. The 20-liter capacity makes it suitable for small families or individuals, allowing for the cooking of various dishes without consuming too much space on your countertop.

The microwave comes equipped with a user-friendly control panel that offers an array of preset cooking programs. These settings not only simplify the cooking process but also take the guesswork out of timing and temperature for common dishes like popcorn, pizza, and baked potatoes. This feature is particularly beneficial for those who may not be as experienced in the kitchen, as it provides a quick and straightforward method to achieve perfectly cooked meals.

In terms of design, the Hotpoint HMT40 boasts a sleek and modern aesthetic, featuring a clean white or black finish that seamlessly integrates into any kitchen décor. Its compact size does not compromise functionality, making it ideal for kitchens with limited space. Additionally, this model has a removable glass turntable, which facilitates even cooking and easy cleaning.

The Hotpoint HMT40 also incorporates advanced safety features, such as a child lock function, ensuring that families with young children can use the appliance securely. The presence of a timer and a cooking end signal further enhances the user experience, allowing for precise cooking times and the prevention of overcooking.

Moreover, the microwave's efficient energy consumption is another attractive aspect, making it an eco-friendly choice for the environmentally conscious consumer. In summary, the Hotpoint HMT40 stands out as a practical appliance that combines power, ease of use, and safety, making it a worthy addition to any kitchen. With its blend of features and stylish design, it caters to the demands of modern cooking while ensuring that users enjoy both convenience and reliability.