GETTING YOUR APPLIANCE READY FOR USE
NOTICE
After the appliance has been delivered, leave it to stand in its upright position for approximately 3 hours, before plugging it into the mains and switch- ing on, to ensure proper performance.
Before placing food in the refrigerator or freezer, clean the interior well with warm water and baking soda.
After plugging the appliance into the socket, make sure that the light is on inside the appliance and then turn the tem- perature control (A) to the “3” setting. After a few hours have passed, you can place fresh food in the refrigerator compartment and frozen foods into the freezer.
Fill the ice trays and put into compartment "M".
How to use the refrigerator compartment...
The temperature control automatically regulates the temperature inside the appliance
1 = minimum cold temperature
5 = maximum cold temperature
It is recommended that a medium setting be used.
To increase the amount of space, optimize arrangement and improve appearance, this appliance has a “cooling area” located within the back panel of the refrigerator compart- ment. When the appliance is operating, this panel may be covered with frost or droplets of water depending on whether the compressor is operating or not.
Do not be concerned about this! The refrigerator is operat- ing normally.
If the temperature control is positioned on higher settings while the refrigerator is heavily filled and the ambient tem- perature high, the appliance may run continuously, resulting in the formation of frost on the back cooling area. This will lead to an increase in energy consumption.
To avoid this situation, just turn the temperature control to a lower setting so that the appliance defrosts automatically.
The refrigerator compartment of your appliance is equipped with "A.I.R. System" (Advanced Integrated Refrigeration) which makes it possible to achieve optimal food storage while simplifying the use of the refrigerator, thanks to the following features:
-Fast temperature reset, after the doors have been opened, the internal temperatures return to optimal levels faster, improving food storage.
-More uniform temperature distribution, this makes it possible to place any type of food on any shelf.
-Higher humidity level, this allows you to store food longer.
-Please follow our instructions carefully on maximum storage time, any food, even the freshest will not remain ed- ible for any extended amount of time.
-Contrary to popular belief, cooked foods do not store any longer than raw food.
-Do not place fluids in containers without covering them, this will lead to an increase in the level of moisture within the refrigerator, causing the formation of frost.
-Be careful not to place containers (plastic or glass), food or other items in direct contact with the cooling area of the interior back wall of the refrigerator. This could harm the food, increase energy consumption and facilitate the forma- tion of condensate (on food, containers, etc.).
B | B | B |
| A | A |
|
|
Hotter air is drawn in (B above). This air is cooled when it comes into contact with the refrigeration panel (A above).
GB | 6 |
