Caring for your Cooker Hood

Before doing any cleaning or replacing the fil- ters or light bulb, always ensure that the elec- tricity supply to the Cooker Hood is switched ‘OFF’.

Filters and their replacement:

THE GREASE FILTER -

Your Cooker Hood is fitted with a grease filter which absorbs grease, dust etc. and helps to keep the appliance clean inside. Gradually the filter will become saturated with grease. When this happens the grease filter must be replaced, usually about every two months depending on use.

IMPORTANT: There could be a possible fire hazard if the grease filter is not replaced when necessary and according to these instructions.

Replacement grease filters are available from your nearest retailer or our Genuine Parts and Accessories Mail Order Hotline (see back cover).

REPLACING THE GREASE FILTER -

The grease filter should be replace every 2 months:

1.Pull the visor out as far as it will go.

2.Remove the filter grille by releasing the two slider catches at each side of the grille.

3.Push the clips to one side and remove.

4.Place the new grease filter in the filter grille.

5.Replace the retaining clips. Refit the grille panel into the hood.

Fig.16

THE CARBON FILTER - (Recirculation only)

The activated carbon filter absorbs odours arising from the cooking. In use, the filter will slowly become saturated and gradually less effective. The filter will normally require changing every six months, depending on the amount and type of cooking you have done.

TO FIT THE CARBON FILTERS -

The deflector

(Fig.17 N) should be Fig.17 fitted over the hole,

fixing it with the special screw provided. The deflector should be fixed to ensure the air flow is away from the wall to avoid dirtying or marking the rear wall .

Place the new carbon filter, ensuring that points Q and R align (Fig. 18). To lock the filter turn in the direction of the arrow (Fig.18 S).

Fig.18

The Hood must not be connected to ducting when in the recirculating mode.

Regular replacement of the charcoal filter will ensure optimum performance from the hood when recirculating.

TO REPLACE THE CARBON FILTER - Remove the grille by turning the locks and pull the grille out and downwards.

Remove the saturated carbon filter by rotating it in an anti-clockwise direction (Fig.19) and replace it with a new one.

Fig.19

11

Page 10 Page 12
Page 11
Image 11
Hotpoint HTN40 manual Caring for your Cooker Hood, Filters and their replacement, Carbon Filter Recirculation only
Page 10 Page 12

HTN40 specifications

The Hotpoint HTN40 is a modern refrigerator known for its blend of functionality, efficiency, and style. This appliance has been designed to meet the needs of contemporary households while offering features that ensure food stays fresh for longer periods.

One of the standout features of the HTN40 is its energy efficiency. With an impressive energy rating, this refrigerator helps homeowners save on their electricity bills without compromising on performance. This commitment to energy efficiency not only benefits the consumer but also contributes to a healthier planet.

The Hotpoint HTN40 comes equipped with a spacious interior that maximizes storage capabilities. Its flexible shelving is adjustable, allowing users to customize the layout according to their storage needs. Additionally, it boasts dedicated compartments, including crisper drawers that maintain optimal humidity levels for fruits and vegetables, keeping them fresh for a longer time.

The refrigerator's anti-bacterial protection technology is another noteworthy characteristic. This innovative feature works to prevent the growth of bacteria, ensuring that the food stored inside remains hygienic and safe for consumption. This is particularly beneficial in households with children or individuals with compromised immune systems.

Furthermore, the HTN40 incorporates a modern cooling system that distributes air evenly throughout the compartment. This advanced technology prevents temperature fluctuations and maintains a consistent environment, which is crucial for preserving perishable items. The frost-free design eliminates the need for manual defrosting, making maintenance a breeze.

In terms of design, the Hotpoint HTN40 offers a sleek and stylish look that complements a wide range of kitchen aesthetics. Its clean lines and modern finishes make it a standout appliance without being overly flashy.

Another appealing aspect of this model is its quiet operation. The refrigerator operates with minimal noise, allowing it to fit seamlessly into any home setting without disturbing daily activities.

In conclusion, the Hotpoint HTN40 is a feature-rich refrigerator that combines efficiency, technology, and stylish design. With its spacious interior, energy-saving capabilities, and innovative features like anti-bacterial protection and even cooling, it caters to the needs of modern households while providing peace of mind regarding food safety and maintenance. This appliance is undoubtedly a great investment for those looking to enhance their kitchen experience.
Top Page Image Contents