Cleaning the carbon filter
It absorbs unpleasant odours caused by cooking.
The charcoal filter can be washed once every two months (or when the filter saturation indication system
– if envisaged on the model in possession – indicates
this necessity) using hot water and a suitable detergent, or in a dishwasher at 65°C (if the dishwasher is used, select the full cycle function and leave dishes out).
Eliminate excess water without damaging the filter, then put it in the oven for 10 minutes at 100° C to dry completely. Replace the mattress every 3 years and when the cloth is damaged.
Mounting and changing the filter
Assembly
Place the mat around the grease filter and fix it in place using the devices provided.
Position the upper cap and fix it in place using the fixing pin.
To disassemble, perform the steps in the reverse order.
Replacing lamps
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are cooled down.
1.Using a flat head screwdriver or equivalent tool, carefully pry loose the light cover.
2.Remove the damaged light and replace with a new 12 Volt, 20 Watt (Maximum) halogen light made for a
3.Reinstall the light cover. (it will snap shut).
EN
7
