Hotpoint HUA787K, HDA797K warranty Questions?, Use This fioblem Solver

-

—			Questions?
	---- Use This fioblem Solver
m
-
		PROBLEM		POSSIBLE CAUSE AND REMEDY
		DISHWASHER		A fuse in your home maybe blown, or the circuit breaker tripped. Replace fuse or reset
		WON’T RUN		circuit breaker. Remove any other appliances from the circuit.
		UNUSUAL NOISE		Utensils may not be secure on rack pins. Or something small may have dropped from
				the rack. Water is causing utensils to rattle. Make sure everything is securely placed
				in dishwasher.
		DISHES DON’T DRY		Make sure inlet water temperature is correct. (See page 6.)
				Unload the bottom rack first. Water from dishes in the top rack maybe spilling into the
				bottom rack.
				Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.
		UNCLEAN DISHES		Check inlet water temperature. It should be at least 120°F. (To test, seepage 6.)
		AND FLATWARE		To obtain the benefits of a complete cycle, be careful that you do not turn the dial any
				further than necessary to start the dishwasher.
				Water pressure may be temporarily low. Turn on a faucet. Is water coming out slower than
				usual? If so, wait until pressure is normal before using your dishwasher.
				PluWed air gap. (See page 11.)
				Improper rack loading. (See pages 8-9.)
		BLACK OR GRAY		Aluminum deposits often leave marks when they rub against other things. Remove marks
		MARKS ON DISHES		with a mild abrasive cleanser.
		DETERGENT	LEFT	Water may not be reaching the detergent cups. Move dishes that maybe blocking
		IN DISPENSER CUPS		detergent cup.
				The dispenser cover may not be opening or may be blocked by improperly loaded items.
				If you used a powder detergent, open the cup and remove any caked-on detergent. If the
				cup still doesn’t open automatically, call for service.
				Detergent may be old. If the powder detergent is hard or caked in the box, throw it away.
				The detergent may not be working well. Try another brand.

12