D ISHWASHER

Installation

Choose where you want to install your dishwasher, you can place it so that its sides or back panel are side by side with furniture or up againstthewall.The dishwasheris providedwithwatersupplyanddrain hoses, which can be directed towards the left or right to facilitate appropriateinstallation.

Levelling.

Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. Make sure that it is not inclinedmorethan2degrees.Ifthe applianceislevel,itwill helpensure its correct operation.

Cold water connection. Connect the cold water supply hose, inserting the small filter supplied with the dishwasher and makingsurethatitisfastenedtightly in place (see figure 2). If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damagetoyour dishwasher.

Drainhoseconnection.

WARNING: Connect your dishwasher drain hose to pipes which connect to the foul drain system and not to surface water drains.

IMPORTANT: For the correct operation of your dishwasher, it is essentialtocomplywiththefollowing information:-

Standpipe:

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with‘retainingflaps’,ensuretheyare insertedfullyintothestandpipe. This will prevent the pipe from jumping outduringinstallationanduse.

SinkWasteSystem:

For under sink drainage:

Before connecting the drain hose, remove any internal restrictions - Thiswillpreventabuildupofdebris which could cause a blockage.

Remove any restrictions from the waste spigot and ensure that the sealingbungisremoved.Thehose should be routed, such that it is raised to a minimum height of 800mm(31/2”).

NOTE: Ensure the sink outlet pipe has a minimum diamtere of 32mm.

Height Adjustment

Insert the appliance into the cutout andthenadjusttheheightusingthe screws located on the front bottom part of the machine. Use a screwdriver to turn the screws in the clockwise or anti-clockwise direction to increase or decrease the height respectively.

A

Fig.2

DONOTpositionthestandpipenear an electrical outlet.

ENSURE that the drain hose is not kinked and it is routed as shown in thediagram.

The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your householdsink.

It MUST NOT be connected to a surface water drain.

1.Untie the end of the GREY drainage hose from the rear of the appliance.

2.Reposition the ‘Hooked End Support’ as required along the GREY drainage hose.

3.If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

4.Attach the GREY drainage hose to the under sink waste disposal unit securely, using the clip and rubber tube supplied.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

6

Page 5 Page 7
Page 6
Image 6
Hotpoint Instructions manual Levelling, Drainhoseconnection, Standpipe, SinkWasteSystem, Height Adjustment
Page 5 Page 7

Instructions specifications

Hotpoint, a well-known brand in the home appliance industry, offers a wide range of products designed to simplify daily chores while ensuring optimal performance. Their user manuals, commonly referred to as "Hotpoint Instructions," provide essential guidelines for operating their various appliances, including refrigerators, washing machines, ovens, and dishwashers. These instructions are not just a source of troubleshooting tips but also an extensive resource to help consumers fully utilize the features and technologies integrated into each appliance.

One of the key features of Hotpoint appliances is their commitment to energy efficiency. Many models are equipped with advanced energy-saving technologies that help reduce power consumption while maintaining performance. This is particularly evident in their washing machines, many of which boast an A+++ energy rating, ensuring minimal environmental impact as well as cost savings on energy bills.

Hotpoint also places a strong emphasis on user-friendly design. Their appliances often incorporate intuitive controls and clear displays, making it easy for users to select settings and monitor their cycles. For instance, the washing machines often feature a digital display that provides information on remaining time and cycle status, alongside an easy-to-navigate dial for program selection.

In terms of innovation, Hotpoint integrates various technologies to improve functionality and performance. For example, their dishwashers may include an "Intensive" wash cycle that targets heavily soiled dishes, and many models are equipped with adjustable racking systems, allowing for flexible loading options tailored to different types of cookware.

Safety features are also a priority for Hotpoint. Many appliances come with child lock functions, ensuring that settings cannot be changed by little hands during operation. Their ovens often include automatic shut-off features that provide an additional layer of safety for users.

Hotpoint appliances are designed with durability in mind, often utilizing robust materials and finishes that withstand the test of time. This focus on longevity makes Hotpoint a reliable choice for consumers looking for quality appliances.

In summary, Hotpoint Instructions provide comprehensive guidance on using their diverse range of household appliances, highlighting features such as energy efficiency, user-friendly interfaces, innovative technologies, safety measures, and durability. By following the provided instructions, customers can unlock the full potential of their Hotpoint products, ensuring that daily cooking, cleaning, and laundry tasks are not only efficient but also enjoyable.
Top Page Image Contents