conditions of the previously set function:
a)The cooking zone corresponding to the timer is on (cooking level > 0): The timer is programmed in reference to the cooking zone; the cooking zone automatically switches off when reset; an independent timer cannot be selected. The cooking level setting is accessed when the timer button is pressed again.
b)The cooking zone corresponding to the timer is off (cooking level = 0): The timer is independently programmed and continues to function even in OFF. The cooking zone cannot be activated until the timer is functioning.
Setting of the Timer value
-Following the selection of the time, the related LED flashes as described above. The countdown time of the desired timer can be set by means of the +/- buttons.
-Starting with the plus button, the first value displayed is “01” and progressively increases from 1 to a maximum value of “99” (upper limit).
-Starting with the minus button, the value displayed on the indication is “30” and diminishes to “01” (first lower limit). When this value is reached, an acoustic signal is emitted. By pressing the minus button again, the display “00” will not be modified (second lower limit).
-Setting can be performed by permanently pressing the plus or minus buttons or by intermittently pressing them (selection: press button, release, press button, release, etc).
-If the button is permanently pressed, the regulation speed automatically accelerates, meaning that the time between one step and the next is reduced, until the button is released.
-If the Plus or Minus buttons are not pressed within 10 sec. (parameter), after having selected the timer of the current cooking zone (the display remains on “00”), the indication and allocation of the +/- buttons automatically switch to the cooking zone.
-When a timer is used as an alarm, the indication and allocation of the buttons does not switch to the cooking zone, being that this cannot be activated.
-The timer normally starts in countdown, if programmed with two values that are not 0. For example: the timer starts when the Plus button is released after the timer value has been set at “01”.
-The timer settings have priority over the delimitation of the operating time if high cooking levels have been set.
-If only one alarm has been programmed, the control remains at first in the standby mode (no other cooking zone is on). If no other new values are introduced, the TC behaves as described above and switches to the OFF mode.
Timer laps/timer alarm and confirmation
-The last 10 sec. before the timer lapses are displayed (countdown up to alarm).
-Once the set time of the timer has lapsed, the timer alarm is activated and the assigned cooking zone is
switched off.
- The display and the selected timer LED flash GB alternating the cooking level from “00” to “H”, if there
is residual heat.
-The warning alarm lasts for at least 2 minutes if the user does not switch it off before.
-The alarm signal switches off after the 2 minutes is up or if any button is pushed. The buzzer and the timer control light are switched off.
Timer off /Modification of the timer setting
-The timer settings can be modified in the Standby or On mode at any time after the selection has been made by pressing the Plus or Minus buttons.
-The timer can be switched off, setting it to value “00”, by pressing the Minus button or by pressing the Plus and Minus buttons together.
Key Lock (child safety)
Locking/unlocking of the Key Lock
The keypad is blocked when the Key Lock
button is pressed in the Standby or On mode; the
The control continues to operate in the previously set mode but can no longer be controlled by other buttons, except by the
Switching off with the ON/OFF button is also possible when locked. The
Unlocking/deactivation of the Key Lock
The keypad is unlocked and the
Keep- warm function (Lo Temp)
The
lower power. The
Lowering the cooking temperature with the
Precautions
-in case you detect a crack, however small, in the hob surface, immediately disconnect the power supply
5
