Read all safety information before using

To reduce the risk of fire, electric shock, or injury to persons

when using your appliance, follow basic precautions, including the following sections.

• Use this appliance only for its

intended purpose as described

in this Owner's Manual.

• This dryer must be properly

installed and located in

accordance with the Instigation

Instructions before it is used.

If you did not receive an

Instigation Instructions sheet with your dryer, you can obtain

one by calling, toll free, the GE

Answer Center", 800.626.2000.

-Properly ground to conform

with all governing codes and

ordinances. Follow details in

Installation Instructions.

-Install or store where the tempera- ture is above 50°F. (10°C.). Do

not install the-r where it will be exposed to the weather.

-Connect to a properly rated,

protected and sized power supply circuit to avoid electrical overload.

-Gas dryers MUST be exhausted

to the outside. Carefully follow

the Exhausting details in the

Instigation Instructions.

-Exhausting electric dryers to

the outside is STRONGLY

RECOMMENDED to prevent

large amounts of moisture and

lint from being blown into the

room. Carefully follow the

Exhausting details in the

Insolation Instructions.

Do not repair or replace

any part of the appliance or

attempt any servicing unless

specifically recommended in this

Owner's Manual or in published

user-repair instructions that you

understand and have the skills to carry out.

When disconnecting this

appliance pull by the plug rather

than the cord to avoid damage to

the cord or junction of cord and plug. Make sure that the cord

is located so that it will not be

stepped on, tripped over or

otherwise subjected to damage or stress.

4

Page 4
Image 4
Hotpoint NWXR473GTNKXR473GT Gas dryers Must be exhausted, Exhausting electric dryers to, Exhausting details