Hotpoint NWXR473GTNKXR473GT Synthefia, permanent, Loads of heavy items, Mbmlng loads

Problem Possible Causes Wkstto Do

No fabric sof-temerw_ used

Synthefia, permanent

and blends am canse static

loads of heavy items

(llke beach toweb)

_trob n_rOl_rly set

Lint filt_ is full

Improper or ol_lruct_l

Blown fuses or tril3_! drcnit breakers

O_rloac_3g/

_mb'mlng loads

Underloadin[

•Try a fabric softener.

•Adjust controls for less dl_/ing.

•Try a fabric softener•

•Try a fabric softener.

•Separate heavy items fTom light weight items

(generally, a well-sorted washer load is a well-sorted dryer load)•

sLarge, heavy loads contain more moisture

and take longer to dry. Separate large, heavy

items into smaller loads to speed drying time.

• Match control settings to the load you

aredryin[[.

•Clean lint filter before every load.

•Check instigation instructions for proper ducting/venting.

•Make sure ducting is clean, free of kinks and unobstructed.

•Check to see if outside wall damper operates easily.

•See the Venting the Dryer section.

•Replace fuses or reset circuit breakers. Since

most dryers use 2 fuses/breakers, make sure both are operating•

•Do not put more than one-her load in the dryer at a time.

•If You are drying only one or two items, add a few items to ensure proper tumbling•

16