Electrical connection

Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below).

Fitting the power supply cable

• The socket can withstand the maximum power of

the appliance, which is indicated on the data	GB
the appliance, which is indicated on the data
plate (see below).

•	The voltage is in the range between the values
	indicated on the data plate (see below).
•	The socket is compatible with the plug of the
	appliance. If the socket is incompatible with the

1.Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram).

2.Install the power supply cable by loosening the cable clamp screw and the three wire contact screws L-N- . Connect the wires to the corresponding terminals: the Blue wire to the terminal marked (N), the Brown wire to the terminal marked (L) and the Yellow/Green wire to the terminal

plug, ask an authorised technician to replace it.

Do not use extension cords or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

The cable must not be bent or compressed.

The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

The manufacturer declines any liability should these safety measures not be observed.

APPLIANCE SPECIFICATIONS

width 43.4 cm

marked (see diagram).

3.Secure the cable by fastening the clamp screw.

4.Close the cover of the terminal board.

Connecting the electricity supply cable to the mains

Install a standardised plug corresponding to the load indicated on the data plate (see table).

The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3 mm installed between the appliance and the mains. The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.

The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations.

Before connecting the appliance to the power supply, make sure that:

•The appliance is earthed and the plug is compliant with the law.

	Dimensions	height 39.5 cm
		depth 40.8 cm
	Volume	70 l
	Electrical	voltage: 230 - 240 V~ 50Hz
	Electrical	maximum power absorbed
	connections	maximum power absorbed
	connections	2600-2800W (see data plate)
		2600-2800W (see data plate)
		Directive 2002/40/EC on the
		label of electric ovens.
	ENERGY	Standard EN 50304
	ENERGY	Declared energy consumption
	LABEL	Declared energy consumption
	LABEL	for Forced convection Class –
		for Forced convection Class –
		heating mode:
		Gratin.
		This appliance conforms to the
		following European Economic
		Community directives:
		2006/95/EEC dated 12/12/06
		(Low Voltage) and subsequent
		amendments –
		2004/108/EEC dated 15/12/04
		(Electromagnetic Compatibility)
		and subsequent amendments -
		93/68/EEC dated 22/07/93 and
		subsequent amendments.
		2002/96/EEC and subsequent
		amendments.
		1275/2008 stand-by/off mode.

OS 897D IX/HP, OS 897D C IX/HP specifications

The Hotpoint OS 897D C IX/HP and OS 897D IX/HP are highly regarded built-in ovens that bring together a blend of style, efficiency, and cutting-edge technology. These models are designed to meet the needs of modern kitchens, characterized by their sleek design and array of practical features.

One of the standout features of both ovens is their multifunction cooking capabilities. With a range of cooking modes, including conventional, fan-assisted, and grill options, users can experiment with various cooking techniques to achieve perfect results. The inclusion of a fan-assisted mode ensures even heat distribution, allowing food to cook uniformly, whether baking cakes or roasting meats.

In terms of capacity, the Hotpoint OS 897D series offers a generous internal space, accommodating large dishes with ease. This is particularly beneficial for families or those who enjoy entertaining, as it allows for batch cooking or the preparation of multiple dishes simultaneously. The spacious interior is complemented by a telescopic shelf system, enabling easy access to hot dishes without the risk of burns.

Energy efficiency is another critical aspect of the OS 897D C IX/HP and OS 897D IX/HP models. Both ovens feature A-rated energy efficiency, which not only helps to save on electricity bills but also demonstrates a commitment to environmentally conscious cooking. The static and fan-assisted electric cooking options provide flexibility while ensuring minimal energy consumption.

Another innovative technology is the Smart Control feature. This function allows users to manage cooking times and temperatures with precision, often via a digital display and user-friendly control knobs. This level of control contributes to successful cooking outcomes while reducing the risk of overcooking or undercooking.

Cleaning is made easy with the integrated pyrolytic self-cleaning system found in both models. This feature heats the oven to very high temperatures, effectively incinerating food residues and grease, making post-cooking cleanup a breeze. The user-friendly design and removable inner door glass also facilitate manual cleaning when needed.

In summary, the Hotpoint OS 897D C IX/HP and OS 897D IX/HP ovens are excellent choices for anyone looking to upgrade their kitchen appliances. With multifunction cooking options, generous capacity, energy efficiency, smart controls, and easy cleaning technologies, these ovens combine modern features with practical functionality, making them a valuable addition to any home.

Hotpoint OS 897D IX/HP, OS 897D C IX/HP manual Electrical connection, Appliance Specifications

Models: OS 897D IX/HP OS 897D C IX/HP