LARDER FRIDGE - MODELS RLA31,RLA33,RLM31,RLM33
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED: To ensure that your fridge runs reliably and efficiently follow these steps.
STEP 1
Choose a location for your fridge, away from any heat sources and allow adequate ventilation - 30mm (11/4 inch) gap above.
STEP 2
Move the fridge into position, using the sides of the cabinet. Take care to avoid damaging the refrigerant circuit pipe work on the rear.
INSTALLATION | SAFETY & |
|
|
|
|
CONTROLS |
|
|
|
STEP 3
Level the fridge by adjusting the front feet. This will stop rocking or vibration and keep the door aligned.
STEP 4
Before plugging in and switching on, leave the fridge in its final location for at least 15 minutes to allow it to settle.
USEFUL ADVICE |
|
|
|
|
|
MAINTENANCE | CLEANING & |
|
|
STEP 5
Plug in and switch on. Allow the fridge to cool before placing food inside.
All food in the fridge should be covered.
STEP 6
Your fridge is now working.
If after 24 hours your fridge is not operating as you want, refer to the Troubleshooting section.
TROUBLESHOOTING |
|
|
|
GUARANTEE | SERVICE & |
|
|
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.