Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

WARNING:THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

Unscrew the cable clamp screw and the contact screws L-N-6.

Fasten the wires beneath the screwheads using the following colour scheme:Blue (N) Brown (L) Yellow-Green6

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Electrical Connection:

4 2 N L

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

IMPORTANT:

After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

This appliance conforms to the following EEC Directives:

Low Voltage Equipment 73/23/EEC 93/68/EEC

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A

Supply cable: 3x1.5mm2

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Electromagnetic Compatibility 89/336/EEC

93/68/EEC

Inner dimensions of the oven:

width 43.5cm

depth 40.0cm

height 32.0cm

Inner volume of the oven: 56 lt

Voltage and frequency of power supply:

230-240V~

50/60Hz

2250-2400W

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens Norm EN 50304

Energy consumption for Forced convection

heating mode: b Fan assisted

Declared energy consumption for Natural convection Class heating mode: a Convection

13

Page 13
Image 13
Hotpoint SD 52K - SD 52 manual Electrical Connection, N L

SD 52K - SD 52 specifications

The Hotpoint SD 52K - SD 52 is a freestanding double oven cooker that stands out for its combination of performance, versatility, and user-friendly design. Ideal for both beginner cooks and experienced chefs, this model brings a blend of traditional roasting and contemporary heating technologies, making it suitable for a variety of cooking tasks.

One of the key features of the Hotpoint SD 52K - SD 52 is its dual cavity design. The main oven is equipped with a conventional heat system, which provides users with the flexibility to cook larger meals efficiently. The second cavity serves as a secondary oven, perfect for baking smaller dishes or keeping food warm. This dual functionality allows for multitasking in the kitchen, reducing cooking times and enhancing productivity.

This model boasts a solid A energy rating, making it an eco-friendly choice for consumers concerned about energy consumption. The efficient design not only helps to reduce bills but also minimizes the carbon footprint, contributing to a more sustainable kitchen environment.

The Hotpoint SD 52K - SD 52 is also outfitted with an easy-to-use control panel, featuring a rotary dial and a digital display. This user-friendly interface ensures that adjusting temperatures and settings is quick and straightforward.

In terms of cooking technologies, this cooker incorporates a fan-assisted cooking feature in its main oven. This technology helps to distribute heat evenly throughout the chamber, ensuring that dishes are cooked to perfection without the hassle of rotating trays. Ideal for baking bread, pastries, and various meats, the fan also contributes to reduced cooking times.

Cleaning this cooker is made easy thanks to the enamel interior, which prevents food from sticking and simplifies the cleaning process. Users can enjoy the ease of maintaining their appliance without the need for harsh chemicals, making it a practical choice for busy households.

Furthermore, the Hotpoint SD 52K - SD 52 comes with safety features such as a grill function that automatically shuts off after a set period, promoting peace of mind while cooking.

In conclusion, the Hotpoint SD 52K - SD 52 embodies a well-rounded, efficient cooker designed for modern kitchens, providing essential features, advanced technologies, and a commitment to energy efficiency. Whether for family dinners or entertaining guests, it stands as a reliable companion for any culinary adventure.