The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

EN

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Electrical Connection

Before inserting the plug into the electrical socket, make sure that:

•the socket is earthed and complies with current regulations;

•the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

•the power supply voltage falls within the values indicated on the data plate on the inside of the door;

•the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see After Sales Service); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See After Sales Service)

This appliance must be earthed

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is fitted.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH ‘E’ or

NEUTRAL ‘N’

LIVE ‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current-operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

3

Page 2 Page 4
Page 3
Image 3
Hotpoint SDAL 1200 manual Electrical Connection, Changing the Plug, This appliance must be earthed, Changing the Mains Lead
Page 2 Page 4

SDAL 1200 specifications

The Hotpoint SDAL 1200 is a powerful washing machine that embodies cutting-edge technologies designed to enhance the laundry experience. With its sleek design and user-friendly interface, this appliance is tailored for modern households seeking efficiency and reliability.

One of the standout features of the Hotpoint SDAL 1200 is its impressive 1200 RPM spin speed. This high spin speed effectively removes excess water from your laundry, leading to shorter drying times. As a result, not only does this feature save time but it also helps to reduce energy consumption, making it an eco-friendly choice for the environmentally conscious consumer.

The SDAL 1200 is equipped with a variety of washing programs to cater to different fabric types and soil levels. These include options for cotton, synthetic, delicate, and rapid washes, allowing users to customize their laundry according to their needs. The quick wash feature is particularly notable, providing a complete wash cycle in as little as 30 minutes, perfect for busy lifestyles.

Energy efficiency is another hallmark of the Hotpoint SDAL 1200. It boasts an A+++ energy rating, ensuring that it consumes minimal electricity while delivering optimal performance. This not only helps reduce utility bills but also minimizes the carbon footprint associated with laundry.

Additionally, the machine features innovative technologies such as the Anti-Allergy option, which is designed to eliminate allergens and bacteria from your clothes. This makes it an excellent choice for households with sensitive skin or allergies, offering peace of mind along with cleanliness.

The design of the Hotpoint SDAL 1200 is also user-centric. Its intuitive digital display allows easy program selection and monitoring of wash cycles. Furthermore, the adjustable spin speed and temperature settings provide an added level of customization, making it suitable for a wide range of laundry items.

In conclusion, the Hotpoint SDAL 1200 stands out for its efficient performance, variety of washing programs, energy-saving capabilities, and user-friendly features. Whether you're dealing with daily laundry or special care items, this washing machine delivers excellent results while integrating modern technology to simplify the process. With its stylish design and advanced functions, the Hotpoint SDAL 1200 is a valuable addition to any home.
Top Page Image Contents