Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see After Sales Service).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor / surface where the dishwasher rests (A).

•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

•remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

•Untie the end of the GREY drainage hose from the rear of the appliance.

•If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

*Only available in selected models.

SDAL 1200 specifications

The Hotpoint SDAL 1200 is a powerful washing machine that embodies cutting-edge technologies designed to enhance the laundry experience. With its sleek design and user-friendly interface, this appliance is tailored for modern households seeking efficiency and reliability.

One of the standout features of the Hotpoint SDAL 1200 is its impressive 1200 RPM spin speed. This high spin speed effectively removes excess water from your laundry, leading to shorter drying times. As a result, not only does this feature save time but it also helps to reduce energy consumption, making it an eco-friendly choice for the environmentally conscious consumer.

The SDAL 1200 is equipped with a variety of washing programs to cater to different fabric types and soil levels. These include options for cotton, synthetic, delicate, and rapid washes, allowing users to customize their laundry according to their needs. The quick wash feature is particularly notable, providing a complete wash cycle in as little as 30 minutes, perfect for busy lifestyles.

Energy efficiency is another hallmark of the Hotpoint SDAL 1200. It boasts an A+++ energy rating, ensuring that it consumes minimal electricity while delivering optimal performance. This not only helps reduce utility bills but also minimizes the carbon footprint associated with laundry.

Additionally, the machine features innovative technologies such as the Anti-Allergy option, which is designed to eliminate allergens and bacteria from your clothes. This makes it an excellent choice for households with sensitive skin or allergies, offering peace of mind along with cleanliness.

The design of the Hotpoint SDAL 1200 is also user-centric. Its intuitive digital display allows easy program selection and monitoring of wash cycles. Furthermore, the adjustable spin speed and temperature settings provide an added level of customization, making it suitable for a wide range of laundry items.

In conclusion, the Hotpoint SDAL 1200 stands out for its efficient performance, variety of washing programs, energy-saving capabilities, and user-friendly features. Whether you're dealing with daily laundry or special care items, this washing machine delivers excellent results while integrating modern technology to simplify the process. With its stylish design and advanced functions, the Hotpoint SDAL 1200 is a valuable addition to any home.

Hotpoint SDAL 1200 manual Connecting the water supplies, Sink Waste System

Models: SDAL 1200