Hotpoint SE100PX manual Programming your cooking, Practical cooking advice

Models: SE100PX

1 16
Download 16 pages 5.36 Kb
Page 9
Image 9
Programming your cooking

Programming your cooking

!Select a cooking mode before programming.

Programming Time

Press

, then:

1.

Set the time using “+” and “-” on the left side of the

control panel.

2.

Press

to store the setting.

3.

Press “START” to activate programming.

4.

When the selected time has elapsed, END appears

on the TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed. The programme stops automatically at 10:15 a.m.

Programming Delayed Cooking

1.Press When the selected time has elapsed, END appears and repeat steps 1 to 4 as described in the Programming Time procedure.

2.Then press Practical cooking advice and set the end time using “+” and “-” on the left side of the control panel.

3.Press Manual background to store the setting.

4.Press “START” to activate programming.

5.When the selected time has elapsed, END appears on the TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed and the end time is set to 12:30. The programme starts automatically at 11:15 a.m.

Programming has been set when Manual backgroundManual background and Manual background flash.

The CLOCK and COOKING TIME displays show the end time and the cooking time alternately.

To cancel programming press “STOP”.

!When selecting a cooking mode, Manual background is illuminated whereas Manual background is not. When setting the cooking time,

Manual background is illuminated and delayed cooking can be programmed.

Practical cooking advice

GB

!Do not place racks in position 1 and 5 during fan- assisted cooking. Excessive direct heat can burn temperature sensitive foods.

!In the BARBECUE and GRATIN cooking modes, particularly when using the rotisserie, place the dripping pan in position 1 to collect cooking residues (fat and/or grease).

MULTI-COOKING

Use position 2 and 4, placing the food that requires more heat on 2.

Place the dripping pan on the bottom and the rack on top.

BARBECUE

Insert the rack in position 3 or 4. Place the food in the centre of the rack.

We recommend that you set the maximum power level. The top heating element is regulated by a thermostat and may not always be on.

PIZZA MODE

Use a light aluminium pizza pan. Place it on the rack provided.

For a crispy crust, do not use the dripping pan (prevents crust from forming by extending cooking time).

If the pizza has a lot of toppings, we recommend adding the mozzarella cheese on top of the pizza halfway through the cooking process.

9

Page 9
Image 9
Hotpoint SE100PX manual Programming your cooking, Practical cooking advice, When the selected time has elapsed, END appears