![](/images/new-backgrounds/1147936/14793631x1.webp)
The Controls - TDL34 and TVM35
Heat Switch (OUT low heat, IN high heat) Alarm Switch (IN on) Drying Light Auto Light
Drying Guide | Delay Timer | Timer Control |
Setting Delayed When using the Time Delay, select the number of delay hours you require
Startbefore selecting the drying time. Select the delay period by rotating the timer knob in a clockwise direction, to the number of hours delay you require. The dryer will start its programme when the time selected has elapsed.
Do not rotate the knob beyond 12 hours (maximum delay time), or past the zero stop.
If you have selected more delay than you require, turn the knob
Note: Ensure that the door is closed during the time delay period.
Programme | To set the required programme, all you have to do is turn the Timer Control | |
Setting | clockwise until the required selection appears in line with the indicator. | |
| Never turn the Timer Control | |
| This operation also starts the dryer, provided the door is closed, and the | |
| machine is plugged in. | |
Programme | 1. | Automatic Drying average loads ✽ |
Options | 2. | Automatic Drying large loads ✽ |
3.Easy Iron Cycle.
4.Timed drying (up to 60 minutes).
5.Cool Tumble Phase.
(i)Automatic The Auto drying programmes will automatically dry most loads to the fully dry
Drying | ready to wear condition. This eliminates the need to guess the drying times |
| and saves energy. High Heat MUST be selected (Heat switch IN). |
| To select Auto drying, turn the selector to position. |
| ✽ for average loads and ✽ for large loads. |
| ✽ Auto drying average loads |
| 1 to 3kg Cottons, Polycottons or Synthetics (Dry weight). |
| ✽ Auto drying large loads |
| 3 to 5kg Cottons (Dry weight). |
| When the door is closed the Auto Drying light will glow to indicate that Auto |
| drying programme is running. |
| When the load is dry, the selector will automatically advance to the 8 minute |
| cool tumble phase. |
Note: | ● If LOW heat is selected for an Auto drying programme, the dryer will |
| advance to COOL without drying the load. |
| ● For acrylics and acrylic mixtures, select LOW heat and use timed |
| drying. |
| ● Small loads (Less than 1kg) must be dried using the timed drying |
| programme. |
16