Sharp BD-HP25U operation manual Information on MAC addresses, Settings

SETTINGS

7 Press ENTER, then enter the access point name.

• The access point name is manually entered using the screen for inputting characters. (See page 49.)

Enter the access point name.

Access Point:

Next

8 Select “Next”, then press ENTER.

9 Press a/b to select your appropriate security key, then press ENTER.

• When selecting WPA/WPA2, selectable security keys are PSK/TKIP and PSK/AES.

Select the security key.

OPEN

WEP

WPA-PSK(AES)

WPA-PSK(TKIP)

WPA2-PSK(AES)

WPA2-PSK(TKIP)

10 Press ENTER, then enter the security key code.

• Enter the exact same security key which has been set in the wireless router.

• The security key code is manually entered using the screen for inputting characters. (See page 49.)

Enter the security key.

Security key:

Next

11 Select “Next”, then press ENTER.

12 For testing after confirming the settings, select “Test”, then press ENTER.

•If the test has failed, an error message appears. Retry to perform the settings after checking that the connection (page 19) is performed properly.

Confirm your setting.

Access Point: XXXXXXXXXXXX

Security key: XXXXXXXXXXXX

Test

13 Follow steps 5–10 of “When selecting Cable” on page 46 to complete the network connection settings.

Information on MAC addresses

A MAC address is a unique ID number for network equipment. A MAC address is necessary for MAC address filtering on the wireless router/ access point.

Before the wireless communication setup is performed, we recommend writing down the MAC address of the connected wireless LAN adapter and keeping it in a safe place. The MAC address is labeled on the adapter. (The MAC address is displayed on the “Current Ethernet setup info.” screen when wireless communication is set (See step 4 of page 47).)

MAC address

Settings

48