Special wash cycles and Options

Notes:

Optimum performance levels when using the “Fast wash” and “Express 30’” cycles can be achieved by respecting the specified number of place settings.

To reduce consumption, only run the dishwasher when it is full.

Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.com

Wash options*

The OPTIONS may only be set, changed or reset after the wash cycle has been selected and before the Start/ Pause button has been pressed.

Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compatible with the selected wash cycle (see Table of wash cycles), the corresponding symbol flashes rapidly 3 times.

If an option is selected which is not compatible with another (previously selected) option, it will flash 3 times and switch off, while the most recently selected option will remain active. To deselect an option which has been set by mistake, press the corresponding button again.

Delayed Start option

It is possible to delay the start time of the cycle by a period of time between 1 and 24 hours:

1.Select the desired wash cycle and any other options required. Press the DELAYED START arrows to select when the wash cycle is to start (1h, 2h etc.)

2.Confirm the choice using the START/PAUSE button: the countdown begins and the display shows Begins in ...

3.Once this time has elapsed, the DELAYED START symbol switches off and the wash cycle begins.

To deselect the DELAYED START option, press the DELAYED START button until the text OFF appears.

The Delayed Start function cannot be set once a wash cycle has been started.

Zone Wash

GB

This option makes it possible to carry out the wash

 

cycle in the selected rack only. Select the wash

 

cycle and then press the ZONE WASH button: the selected

 

rack lights up and the wash cycle starts in the selected rack

 

only. Press the button again to deselect the option.

 

The option is available with the following wash cycles: Intensive and Normal.

Select the option and the Intensive cycle to start the ULTRAINTENSIVE ZONE washing. This wash cycle is ideal for very soiled mixed loads, e.g. pans and saucepans, dishes with heavy encrustation or difficult-to-clean crockery (grater, vegetable mill, dirty cutlery). The spraying pressure is stronger and the washing temperature higher, thus ensuring optimum handling of stubborn stains.

Select the option and the Normal cycle to start the SAVING ZONE washing. This function makes it possible to reduce energy consumption. Cycle duration might change.

Remember to load the crockery in the selected rack only

ACTIVE OXIGEN option

This device releases ozone molecules into the dish- washer, i.e. a natural substance that reduces un-

pleasant odours.

It should be used between two different wash cycles and ONLY after soiled crockery has been loaded.

To start the ACTIVE OXIGEN option press and hold the but- ton O3.The option will stay active either for 24 hours or until the wash cycle is started. More items can be introduced at any time until full load.

The typical faint odour that can be smelt inside the dish- washer, the same as you sometimes get with storms is due to the ozone produced by lightning discharges. This is nor- mal. The device produces just a small quantity, which soon decays.

No replacement needed.

Multi-functional tablets (Tabs)

This option optimises washing and drying results. When using multi-functional tablets, press the MULTI- FUNCTIONAL TABLETS button; the corresponding symbol will light up. If the button is pressed again, the option will be deselected.

The “Multi-functional tablets” option results in a longer wash cycle.

The use of tablets is only recommended for models having this option and it is not recommended with wash cycles which do not specify the use of multi-functional tablets.

Extra drying

To improve the dryness level of the crockery, press the EXTRA DRYING button and the symbol will light up. If it is pressed again, the option will be deselected.

A higher temperature during the final rinsing and a longer drying phase improve the dryness level.

The EXTRA DRYING option increases the duration of the wash cycle.

Short Time

This option can be used to reduce the duration of the main wash cycles while, maintaining the same washing and drying performance levels. After selecting the wash cycle, press the SHORT TIME button; the illumination of the corresponding indicator light indicates its selection.

Press it again to deselect it.

13

Page 13
Image 13
Hotpoint FDUD 43133, ULTIMA manual Special wash cycles and Options, Wash options

FDUD 43133, ULTIMA specifications

The Hotpoint ULTIMA series is a line of innovative home appliances designed to enhance your kitchen experience with their advanced features and sleek design. Renowned for their reliability and performance, these appliances cater to a variety of cooking and food preservation needs, making them a popular choice for households looking for efficiency and convenience.

One of the standout features of the Hotpoint ULTIMA range is its unique Smart Technology. This includes sensors that monitor cooking parameters, adjusting heat and time automatically to ensure perfectly cooked meals every time. Whether you're baking, roasting, or grilling, the ULTIMA appliances offer precise control that saves you time and energy.

The ULTIMA line also boasts an impressive energy efficiency rating. With advancements in technology, these appliances consume less energy while delivering exceptional performance. This not only helps reduce your carbon footprint but also decreases your utility bills, making it an environmentally friendly choice for modern kitchens.

Another notable characteristic is the spacious interior designs that the ULTIMA ovens offer. With varying capacities, users can select models that best suit their household size. The roomy interiors allow for the cooking of large meals, making it perfect for families or those who love to host gatherings.

Moreover, the ULTIMA series features an easy-to-clean design. The interiors are often coated with self-cleaning enamel, which helps reduce food residue and grime buildup. Additionally, the removable components make it simple to maintain the appliance, ensuring it remains in optimal condition for years to come.

Hotpoint's commitment to user safety is evident in the ULTIMA appliances as well. Many models come equipped with safety features such as cool touch doors, child lock options, and automatic shut-off functions to prevent accidents during cooking.

Incorporating stylish aesthetics, the ULTIMA series is designed to complement any kitchen decor. With a variety of finishes available, including stainless steel and sleek black, these appliances not only perform well but also add a modern touch to your culinary space.

In summary, the Hotpoint ULTIMA series combines cutting-edge technology, energy efficiency, spacious designs, ease of cleaning, safety features, and appealing aesthetics, making it an ideal choice for those who cherish quality and performance in their kitchen appliances.