Hotpoint ULTIMA manual Fault Area, Issue, Cause/How to resolve…, Messages In The Display, Step

Fault Area	Issue	Cause/How to resolve…
Messages In The Display	-DEMO Lit in Display	“Demo”willslideacrossthedisplaywhentheDemonstrationmode
	-Demonstrationmodeactived	hasbeenaccidentallyactivated.
		Followtheinstructionsbelowtocancel“Demo”mode:
	On/off Button	Step 1:
		Press&holdsimultaneouslythe“On/Offbutton”and“Start/Reset
		button”, until “D of” is illuminated in the display.
		Step 2:
		Selectwashprogrammeasnormal
	Start/Reset Button
	-AL05 in Display	- If AL05 is illuminated in the display, then you need to clear the filter
	- Possible Filter Blockage	ofanyblockagesbeforeprogrammecanproceed.
	On/off Button	Step 1: Press&holdthe“On/Offbutton”,until4dashesare
		illuminatedinthedisplay.
		Step 2: Removefilterfrombaseofmachine.
		Step 3: Rinsefiltersunderrunningwaterandensurethatlarge
		foodparticles areremovedfromAreaA.
		Step 4: Locatefiltersbackintothefilterhousingandfirmlypress
		downwards.
		Step 5: Turnthedishwasheronbypressingthe“On/Off”button,
		and selectrequiredprogramme.
			1
		B	2	A
			C
		For additional advice on Cleaning your filter see “Care and
		Cleaning” section of the instruction book.
Poor Wash Results	ResidueOnDishesWhenWash	-Istheselectedprogrammesuitableforthetypeofloadandthe
	CycleComplete	degreeofsoiling?

-Checktheloadingofyourcrockeryintothebaskets(See“Loading YouDishwasher”Sectionoftheinstructionbook).

-Checkthatthefiltersarecleanandinplace(See“Careand Cleaning”Sectionoftheinstructionbook.

-Is the lid of the salt container closed properly?

-Istherinseaiddosagecorrect?

(See section “Poor Drying Results” below for instructions on adding or adjusting rinse aid to your wash).

17