If something goes wrong
First, don’t panic! There may be nothing wrong at all. Look for your problem below, then check the things we suggest. More often than not, this will give you the answer to your problem, and you’ll be able to carry on without having to telephone your Service Office.
If after this you still cannot get your machine to work, follow the advice given on the next page.
Problem | Check these things first |
‘It won’t start’ 1. Is the machine plugged in and switched on at the socket?
2.Is the Timer Control set to required time?
3.Is the door securely closed?
4.Has the fuse blown? (Try plugging in another appliance to check)
5.Have you used an extension lead? Many are not suitable. Try plugging the dryer directly into a socket to check.
‘It is taking a long time to dry’
1.Have you forgotten to clean the filter? It should be cleaned after each load.
2.Have you selected the correct Heat setting for the type of fabric you are drying?
3.Is the flexible Vent Hose blocked or kinked? Check it for foreign objects or condensate (water).
4.Is the air inlet obstructed in any way?
5.Permanent venting - is flap on the storm cover obstructed?
6.Were the clothes ‘excessively wet’ when they were put in?
7.Was the correct time selected?
8.Have you overloaded the dryer?
Any other | Have you |
problem |
|
|
|
| This appliance conforms to the following EC Directives. |
| Low Voltage Equipment |
| 2006/95/EC |
| Electromagnetic Compatibility |
| 2004/108/EC |
14
