Laundry
Special clothing items
Blankets and Bedspreads: acrylic items (Acilan, Courtelle, Orion, Dralon) must be dried with special care on LOW heat setting. Avoid drying for a long period of time.
Pleated or creased garments: read the manufacturer’s drying instructions on the garment.
Starched articles: do not dry these with non- starched items. Make sure that as much of the starch solution is removed from the load as possible before placing it in the dryer. Do not
Drying times
The table below presents APPROXIMATE drying times in minutes. Weights refer to dry garments:
Cottons
High (full) Heat
Drying times
|
| Half Load |
|
| Full Load |
|
|
|
|
|
|
1kg | 2kg | 3kg | 4kg | 5kg | 6kg |
|
|
|
|
|
|
|
|
|
|
|
|
Synthetics
High (full) Heat
Drying times on reduced spin in washing machine
| Half Load | Full Load |
|
|
|
1kg | 2kg | 3kg |
|
|
|
|
|
|
Delicates (e.g.Acrylics)
Low (gentle) Heat
Drying times on reduced spin in washing machine
| Half Load | Full Load |
| 1kg | 2kg |
|
|
|
|
|
|
Times are approximate and can vary depending upon:
●Amount of water retained in clothes after spin cycle: towels and delicates retain a lot of water.
●Fabrics: items that are the same type of fabric but different textures and thicknesses may not have the same drying time.
●Quantity of laundry: single items or small loads may take longer to dry.
●Dryness: If you are going to iron some of your clothes, they can be taken out while still a bit damp. Others can be left longer if you need them to be completely dry.
●Heat setting.
●Room temperature: if the room where the dryer is located is cold, it will take longer for the dryer to dry your clothes.
●Bulk: some bulky items can be tumble dried with care. We suggest that you remove these items several times, shake them out, and return them to the dryer until finished.
!Do not
All fabrics contain a little natural moisture, which keeps them soft and fluffy.
GB
Information | Important |
|
|
Installation |
|
|
|
Description |
|
|
|
Programmes | Startand |
|
|
Laundry |
|
|
|
Suggestions | Warningsand |
|
|
andCare | Maintenance |
|
|
Troubleshooting |
|
|
|
Service |
|
9
