Hotpoint WD52 manual Shooting, Lation, Spenser

shooting

ES NOT

TER

en installed ✗

standpipe

✗

MY MACHINE IS LEAKING

Are the fill hoses on correctly?

If not tighten them.

THE PROGRAMME TAKES A

LONG TIME

Check for low temperature and low pressure for the hot and cold water supply

OUT OF BALANCE!

tions free es?

lation

that have

			Did you know that putting one or two
Is your water pressure too			highly absorbent items in your machine
	✗		can cause it to become
high?			‘OUT OF BALANCE’.
✓			This happens because the items are
Turn the main supply tap		SUDS ARE COMING FROM
		THE DISPENSER DRAWER	clumping together, retaining large
down.
			amounts of water and therefore acting
			as a heavy weight in your machine.
Is the standpipe or household			When your machine is ‘out of balance’ it
drain blocked.	✗	Check the correct amount of
			will not spin.
		suitable detergent has been
✓
		used, refer to manufacturer’s	Try adding a large item such as a
You may need to call in a		recommendations.
			bedding sheet into the load. This will
plumber.			not absorb as much water and will help
			to spread the weight in the drum.

nd of the	Is steam coming from the
unit has
	dispenser drawer?	✗
.			THE LAUNDRY IS NOT DRY
	✓		AFTER USING THE DRY
			PROGRAMME
	The machine is designed to
	release steam from the dispenser
	drawer during hot washes.		Is the cold water turned on at the ✗		If the appliance is still not working
IN THE			tap?		contact:
					Repair Service and Information Desk
NSER	Check the feet have been		✓
					UK 08709 066 066
NT
	levelled.				Republic of Ireland 1850302 200
			Did you select the right heat/time		You will be asked for the following
			setting?	✗
					details: Name and Address, Post
er drawer.			✓		Code,Telephone Number, Date of
spenser					Purchase, Colour and Model/Serial
			Was the laundry spun dry at the		Numbers - which can be found on
			end of a wash programme, if not		the inside of the door.
			select a spin and dry option to		Clear and precise details of the query
			suit the fabric type.		or fault.