Hotpoint WDL 540 P/G/A/K Description of the Washer-dryer and starting a wash cycle, Control panel

Description of the Washer-dryer and starting a wash cycle

GB

Control panel

WASH CYCLE PROGRESS indicator lights

ON/OFF button

Detergent dispenser drawer

WASH CYCLE

knob

DRYING

knob

TEMPERATURE

knob

FUNCTION

buttons with indicator lights

DOOR

LOCKED

indicator light

START/PAUSE

button with indicator light

Detergent dispenser drawer: used to dispense de- tergents and washing additives (see “Detergents and laundry”).

ON/OFF button: switches the Washer-dryer on and off.

WASH CYCLE knob: programmes the wash cycles. During the wash cycle, the knob does not move.

FUNCTION buttons with indicator light: used to select the available functions. The indicator light corresponding to the selected function will remain lit.

TEMPERATURE knob: sets the temperature or the cold wash cycle (see “Personalisation”).

DRYING knob: used to set the desired drying program- me (see “Personalisation”).

WASH CYCLE PROGRESS indicator lights: used to mo- nitor the progress of the wash cycle.

The illuminated indicator light shows which phase is in progress.

DOOR LOCKED indicator light: indicates whether the door may be opened or not (see next page).

START/PAUSE button with indicator light: starts or temporarily interrupts the wash cycles.

N.B. To pause the wash cycle in progress, press this button; the corresponding indicator light will flash orange, while the indicator light for the current wash cycle phase will remain lit in a fixed manner. If the DOOR LOCKED indicator light is switched off, the door may be opened (wait approximately 3 minutes).

To start the wash cycle from the point at which it was interrupted, press this button again.

Standby mode

This washing machine, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again.

6